Identificador: 1324
Abierta
Descripción
PARTE: 2EX-XF-22RP – ALIMENTADOR AUTOMATICO – PARA REASERRADORA - 3/4 HP
Nuevo con garantía
PRESION CON PISTON NEUMATICO AUTOMATICA
PARA SIERRAS CINTAS DE 24” O MAS GRANDES
1/2 HP – 208-240V - 1 FASE
1/2 HP – 208-240V - 3 FASES
VELOCIDAD VARIABLE
VELOCIDAD MIN: 3.4 PIES/MIN
VELOCIDAD MAX: 130 PIES/MIN
1 RODILLO: 9-7/16” X 6-3/16”
GUARDA DE RODILLOS 15-3/4” X 7-7/8”
BRAZO GIRA 30 GRADOS
ANCHO MAXIMO 8-1/4”
PESO 115 KG
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12608 - SIERRA RAJADORA – 1 SIERRA – NORTHTECH SRS-12
PARTE: 12608 - SIERRA RAJADORA – 1 SIERRA – NORTHTECH SRS-12Usada – Buenas condicionesManufacturer’s Specification 15 HP Motor + 1 HP feed motor (with Wye Delta soft start)Mechanical variable speed (45′ – 100′ FPM) provides a speed range for all material types and thickness ranges of 3/16”- 3-1/2”.Bottom & top kickback fingersRack and pinion fence for precise and quick positioningDigital electronic oiler provides maximum chain and race life15-1/2″ distance from column to bla...
AMXmachinery
ASTILLADORA PARA MADERA - HORIZONTAL - 40 HP
PARTE: 2VE-VTH-35/8/2VU
- ASTILLADORA PARA MADERA - HORIZONTAL - 40 HP
TRANSPORTADOR
VTBRATORIO 16” LARGO
NUEVA CON
GARANTIAApplication Description:Type of material to be ground: Wood – Pine, kiln driedForm of material to be ground: Rips from gang-rip, waste
wood from cut-offsTypical size of material to be ground: < 5” x 18” x 16’Required volume of material to be ground: 1,000 lbs/hrDesired screen or particle size: 3/4”Use of ground product: Not Specified SPECIFICATIO...
AMXmachinery
PARTE: 12420 – SIERRA OPTIMIZADORA – DIMTER WEINIG OPTICUT 260
PARTE: 12420 – SIERRA OPTIMIZADORA
– DIMTER WEINIG OPTICUT 260
USADA – MUY BUENAS CONDICIONESYear
of Manufacture: 2018Condition:
ExcellentElectric: 460 Voltage 60 Cycle 3 PhaseGREAT
CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE.Working
dimensions:Cross
section min./max
0.48"- 10.23" width; .25" - 3.15" thickness. Min.
part length 5.5" cut. Length
min/max 15.75"- 16'0".Motor:
10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.Saw:...
AMXmachinery
CEPILLO 2 CARAS – NORTHTECH NT400XL
PARTE:
12273 – CEPILLO 2 CARAS – NORTHTECH NT400XL
USADO – MUY BUENAS CONDICIONES – SOLO POCAS HORAS DE USOCabezales Helicoidales218 hours on the machine43 HP total230 volt
Belt drive