Identificador: 56
Abierta
Descripción
PARTE # 2TA-PT-FA38 – PRENSA ENSAMBLADORA DE GABINETES
Nueva con Garantía
FEATURES:
Heavy gage sheet material frame.
Large pneumatic piston.
Easy operation.
SPECIFICATIONS:
Max. Working Width: 39-1/4"
Max. Working Length: 86"
Motor: 1 HP
Pneumatic Pressure: 90 PSI
Machine Size : 146" x 37" x 91"
Machine Weight: 5400 LBS
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 93 LITROS
PARTE:
2PG-TNF823 – HORNO PARA CERAMICA, VIDRIO, METALES – 93 LITROSNUEVO CON GARANTIAThe digital automatic TnF-82 kiln is large enough for most ceramic projects. Figured at cost per cubic foot, it is among our lowest priced hobby kilns. It uses the same circuit size as most of our studio kilns. Upgrade to a larger kiln later without having to install a new circuit.Features the easy-access drop down switch box. Remove two screws, and the box, hinged at the bottom, opens forward for easy mai...
AMXmachinery
SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14
PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14Used - Excellent conditions – Used for samples only2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPMSaw harbor
5/8"Dust exits 2 of
4" diameter, requres aprox. 850 CFMAir use 72 CFM at
65 PSI based in 15 cycles/minTable height
36-1/8" (917 mm) Pneumatic pedalEach cut takes 4 to
6 seconds
Weight 405 lbs (184 kg)
AMXmachinery
PARTE: AMX-10125 - EXTRACTOR DE TUBO - ASPAS 15” DIAMETRO - MOTOR ½ HP
PARTE: AMX-10125 - EXTRACTOR DE TUBO - ASPAS 15”
DIAMETRO - MOTOR ½ HP
USADO - BUENAS CONDICIONES
MOTOR 1/2 HP, 220/440V, 3 FASES
MEDIDAS: 15” DIAMETRO INTERIOR X
19” DIAMETRO EXTERIOR X 12” FONDO
-500x500.jpg)
AMXmachinery
LIJADORA DE BANDA ANCHA – 37” ANCHO – 2 BANDAS
PARTE: 2EX- XS-2E37 - LIJADORA DE BANDA ANCHA – 37”
ANCHO – 2 BANDAS
NUEVA CON GARANTIA
230/460 Volt
Factory Wired 230 Volt
The Excess
Series is unmatched in quality, performance, and value by any manufacturer, foreign or
domestic. The Excess Series provides heavy-duty construction, quality design
and engineering,
and an excessive number of features that we provide in every
machine.
And to top
it off all of our electrical controls, pneumatic controls, photo electrics,...