Identificador: 91
Abierta
Descripción
PARTE # 2EV-6600 - CORE BUILDER - EVANS 6600
Maquina para hacer el centro o la base de las cubiertas de cocina
The Evans machinery model 6600 core builder produces a quality core every time. Within one pass, this machine bonds the build up to both sides of the panel using hot melt adhesive applies T-Mold for no drip edges and shapes your core to the required profile. The model 6600 Core Builder operates at a feed rate of 20 FPM as it travels on a non-skid straight line feed system. The model 6600 Core Builder is a smart investment by helping you and your company save time and money.
MACHINE SPECIFICATIONS:
Machine Length | 158" |
Machine Width | 89" |
Machine Height | 72" |
Working Height | 36" |
Electrical | 220v 60 Hz 3 Ph |
Air Supply | 100 PSI |
Edge Shaper | 5 HP 5850 RPM 1.25 Spindle Diameter |
Hot Melt Unit | 20 lbs Capacity 1500 Watt Heater |
Feed Rate | 20 FPM |
Center Feed Drive | Non-Skid Pad |
Board Width | 16" Min. to 48" Max |
Board Thickness | 2" Maximum |
Build Up Width | 3/4" Min. to 1-1/2" Max. |
Build Up Thickness | 1-1/2" Maximum |
T-Mold Slotter | 1-1/2 HP 3600 RPM .875" Spindle diameter 8" Blade |
Groover | 1-1/2 HP 3600 RPM .875" Spindle diameter 8" Blade |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ENCHAPADORA DE CANTOS PORTABLE - CON CALDERIN - RECTOS Y CURVOS
PARTE: 2MK-FLEX - ENCHAPADORA DE
CANTOS PORTABLE - CON CALDERIN - RECTOS Y CURVOSNUEVA CON GARANTIAGlue: Granulated Hot-Melt Low TemperatureGlue Temperature: 130º to 180º CTape height: 0-35/64” to 1-57/64”Tape thickness: 0.3 mm - 1 mmFeeder speed: 0 to 19 ft/minPower: 700 WMotor: 1 PhaseVolts/Amps: 127 V - 5,5 A or 220 V - 2,5 AWeight: 21 LbsPerfect for bonding edge tapes to curved pieces.The hand-held is perfect to applying edgebanding to concave and convex curved pieces. It works with...
AMXmachinery
PARTE: 1SL-DC-KF-RM70 - JUEGO DE 2 CUCHILLAS PARA BASTONERA RM-70
PARTE: 1SL-DC-KF-RM70 - JUEGO DE 2 CUCHILLAS PARA BASTONERA RM-70NUEVO CON GARANTIAJUEGO CON 2 CUCHILLASMEDIDAS: 11 MM ESPESOR X 30 MM ANCHO X 73 MM LARGO
AMXmachinery
MOLDURADORA - 6 CABEZALES - WENIG HYDROMAT 22 AL
PARTE:12312
- MOLDURADORA - 6 CABEZALES - WENIG HYDROMAT 22 AL
USADA - BUENAS CONDICIONES
Mfg. 1997
Eleltronic drive, Hydro jointers, 1 manual
jointer.
1&13/16" spindles.
AMXmachinery
PARTE: 12059 - SIERRA MULTIPLE - DE VAIVEN
PARTE: 12059 - SIERRA MULTIPLE - DE VAIVENUsada - Muy buenas condicionesFeatures and Specifications:Saw capacity of 6" width x 8" vertical capacity. Minimum working 2” high X 12” long. Main drive motor to saw frame is 30HP 3PH, wired 460 VServo drive system to feed works is 1/4HP 3PHBlower to saw frame rack for added cleaning value is 3HP 3PHBody of frame saw is (2) sections allowing for fast access to the saw frameSaw blade speed is fixed at 550RPMDust extraction requires min 3000 CFM and...