ID: 2021
Open
.jpg)
.jpg)
Description
PARTE: 12414 – ESPIGADORA DOBLE DE CADENA - CAPACIDAD 59” - FRIULMAC
USADA - BUENAS CONDICIONES
Friulmac Automatic
Cut Off Machine
Cutting Length 6.29" - 59.05"
Working Width 1.18" - 5.51"
Working Thickness 0.47" - 1.37"
Four 4HP (3KW)Trim/Cut-off Motors 2 (2 each side)
Saw Blade Diameter 150mm Max X 30mm bore
Dust Collection 4 X 120mm Outlets
New in 2019
Video: https://www.youtube.com/watch?v=b5BPcY82hjs
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 12420 – SIERRA OPTIMIZADORA – DIMTER WEINIG OPTICUT 260
PARTE: 12420 – SIERRA OPTIMIZADORA
– DIMTER WEINIG OPTICUT 260
USADA – MUY BUENAS CONDICIONESYear
of Manufacture: 2018Condition:
ExcellentElectric: 460 Voltage 60 Cycle 3 PhaseGREAT
CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE.Working
dimensions:Cross
section min./max
0.48"- 10.23" width; .25" - 3.15" thickness. Min.
part length 5.5" cut. Length
min/max 15.75"- 16'0".Motor:
10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.Saw:...
AMXmachinery
CEPILLO 1 CARA - 250 MM ANCHO - 3 HP - MARUNAKA
PARTE:
3MA-SUPERMECA-S - CEPILLO 1 CARA - 250 MM ANCHO - 3 HP - MARUNAKA
NUEVO CON GARANTIAAble to operate by auto return feedingMax Work width x Height : 250 mm (40º) 165 mm (60º)Max work height: 180mmKnife bias angle: 0 - 60 degree (variable)Feed speed: 54m/min (50 hz)Feed motor : 2.2 Kw, 3 phaseHead elevation motor : 0.1 Kw phaseKnife type: Chanching blade typeFront knife size : 335 x 66 x 8mmAccessories:Changing blades, front and rear roller tables and
standard toolsMachine size: (W...
AMXmachinery
TROMPO CON ALIMENTADOR – 5 HP - POWERMATIC
PARTE: 12285 – TROMPO CON
ALIMENTADOR – 5 HP - POWERMATICUSADO – BUENAS CONDICIONES
TS-80 / 9179083
AMXmachinery
ASTILLADORA PARA MADERA - HORIZONTAL - 40 HP
PARTE: 2VE-VTH-35/8/2VU
- ASTILLADORA PARA MADERA - HORIZONTAL - 40 HP
TRANSPORTADOR
VTBRATORIO 16” LARGO
NUEVA CON
GARANTIAApplication Description:Type of material to be ground: Wood – Pine, kiln driedForm of material to be ground: Rips from gang-rip, waste
wood from cut-offsTypical size of material to be ground: < 5” x 18” x 16’Required volume of material to be ground: 1,000 lbs/hrDesired screen or particle size: 3/4”Use of ground product: Not Specified SPECIFICATIO...