Identificador: 1845
Abierta
.jpg)
Descripción
PARTE:
2AR-97181 – LIJADORA DE DISCO Y BANDA
NUEVA EN SU CAJA ORIGINAL
Powerful
3.5 amp motor
Cast aluminum table tilts to 60° for use with belt or disc
6 in. disc for fast stock removal
Miter gauge for sanding angles on workpiece
Adjustable belt sands inside and outside curves
Reinforced steel motor housing
AC Volts: 120
Accessories Included: Miter gauge, sanding belt and sanding disc
Amperage (amps): 3.5
Belt width”: 4 in.
Diameter disk: 6 in.
Horsepower (hp): 3/4
Speed (max): 1819 RPM (disc) / 1185 SFPM (belt)
Product Weight: 27 lb.
Shipping Weight: 28.80 lb.
Table tilt (deg): 60°
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12134 – PRENSA CALIENTE – 5 PLATOS
PARTE: 12134 – PRENSA CALIENTE
– 5 PLATOS
USADA – EN BUENAS CONDICIONES
4' x 8'
52" x 100" x 1.750" platens
3" of daylight
500 ton capacity
120 gallon hydraulic unit with 6 hp volume pump
7 hp-3600 rpm high pressure pump
AMXmachinery
PARTE: 12466 - SISTEMA FINGER JOINT - WEINIG GRECON
PARTE: 12466 - SISTEMA
FINGER JOINT - WEINIG GRECON
USADO
- BUENAS CONDICIONES
- Robusto y poderoso
- Alta capacidad operativa, hasta 200
piezas/min
- Alturas de fresado hasta 205 mm
- Anchos madera de 205 mm y longitudes de
madera en bruto de 150 a 1000 mm
- Con una mesa giratoria automática que se
desplaza a lo largo de la línea
- Se pueden producir diferentes perfiles de
juntas dentadas verticales y horizontales en una amplia gama de diferentes
unida...
AMXmachinery
ARMADORA DE SILLAS - LANCASTER
PARTE: 12384 - ARMADORA
DE SILLAS - LANCASTER
USADA – BUENAS
CONDICIONESMax opening between jaws (front/back) 32"Max opening between jaws (side/side) 26"Max opening between clamping jaws on side clamp assembly
24"(2) horizontal adjustable swivel side clampsPneumatic clamping cylinders with 5" stroke(1) horizontal adjustable side to side clamp Pneumatic
clamping cylinder with 5" strokeManual traverse of end clamping jaws Bottom chair leg support
table
Foot ped...
AMXmachinery
LAMINADORA 62" RODILLOS SEGMENTADOS
PARTE # 2EV-0207 – PINCH ROLLER 62” - RODILLOS SEGMENTADOS – EVANS 020762" capacitySegmented bottom roller for countertop operationSafety Gates on In-Feed and Out-FeedSolid Top RollerSplit Bottom RollerFeed Rate: 50 FPMMaximum Width: 62”Maximum Thickness: 2”Work Height: 30-1/2”(Optional Riser Available)Drive Motor: ½ HPElectrical: 120 V, 1 PH, 60 HzAir Requirement: 100 PSIShipping dimensions 85” long X 33” wide X 57” high*Note: Options Listed under 0257 Pinch RollerOptions:- ...