Identificador: 265
Abierta
MEDIDOR DE HUMEDAD PARA MADERA – SIN PINS - LIGNOMAT – LIGNO-SCANNER D
AMXmachinery
Descripción
PARTE: 2LI-D - MEDIDOR DE HUMEDAD PARA MADERA – SIN PINS - LIGNOMAT – LIGNO-SCANNER D
Nuevo con garantía
Measuring | 5-60% dependent upon species setting* |
Display | 0.1% resolution for the entire range. |
Species | 71 wood group settings, or simply use specific gravity of the wood, between 0.3 and 1.0 (setting 30-100) |
Gypsum | N/A |
Reference | 0-99 for non-wood building materials |
Calibration | Stable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary. |
Calibration Check | External calibration check block #TS is available to verify the calibration and functions of meter. |
Included | Pouch, one 9V battery, manual and laminated wood group chart. |
Size | Pocket-size 2″ x 5.5″x0.5″, Measuring pad 1 5/8″ x 2 5/8″ |
Weight | 8 ounces (200g), made out of high-impact plastic |
Warranty | All moisture meters have a 2 year warranty. Pins and battery are excluded. |
The measuring depth of a pinless meter is crucial. Moisture readings are too low, when the Scanner is placed on a work piece which is thinner than the measuring depth. Scanners never measure any deeper than the measuring depth.
The entire measuring pad has to be on a flat and smooth surface for accurate readings
*Species Corrections for Ligno-Scanners and Ligno-VersaTec correlate directly to the Specific Gravity. Example: For a specific gravity of 0.57 (0.57g/cm 3 )set species # 57. Specific Gravity for most wood species can be found on the Internet. We also include a Species Chart with recommended settings.
The Ligno-Scanners SDM and the Ligno-VersaTec have calibrations built-in for drywall and concrete and a reference scale for non-wood building materials.
Measuring range: 5-60% dependent upon Species. For hardwoods the Scanners read lower than 5%, for softwoods the Scanners start reading above 5%. Resolution of read-out: 0.1% Less accurate above Fiber Saturation Point at 30%.
Wood temperature correction is not necessary.
1 9-V Battery for 3000 Readings, Battery included
Size: 1/2″H x 2″L x 5″W (for Scanner LD width is 2 7/8″) Weight: 8 ozs
Comes in a Carry Pouch with Belt Loop.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
Chaleco De Seguridad En Malla Color Naranja
PARTE: 1SIL-DC-EQ-CHA-MNA - Chaleco De Seguridad En Malla Color NaranjaChaleco de seguridad en mallaColor naranjaCon reflejanteBies amarillo de alta visibilidadBroche de clicLos chalecos de seguridad son parte fundamental cuando hablamos de vestimenta en un entorno de seguridad, ya sea en el trabajo, en vialidad o en cualquier parte en donde se requiera mayor visibilidad. Los chalecos se recomiendan usar tanto en el día como en la noche, sin embargo, contienen bies amarillo de alta visibilidad....
AMXmachinery
ROUTER PARA MADERA – 1/2”, 1,500W, 2 HP - SILVERLINE
PARTE: 1SL-DC-ROUT2 – ROUTER PARA MADERA – 1/2”, 1,500W,
2 HP - SILVERLINENuevo con garantíaPotencia 1,500W 2 HPAjuste de profundidad variableManijas de alta resistenciaTrabajo a dos manos
Capacidad de broquero 12,7mm (1/2″)
AMXmachinery
PARTE: 12456 - ENCHAPADORA DE CANTOS - HOLZ-HER SPRINT 1411-3
PARTE: 12456 - ENCHAPADORA DE
CANTOS - HOLZ-HER SPRINT 1411-3
USADA - BUENAS CONDICIONES