Identificador: 37
Abierta
Descripción
PARTE # 2RT-R200E/A - MESA ARMADORA BASTIDORES - PIES 5X12
5'x12' Assembly Table
Hold Down Beam with (5) Adjustable Hold Down Cylinders
45 Degree Vertical Easel
Squaring Bars on Right, Left, and Bottom Sides
1" Thick Formica Surfaced Table
Heavy Duty Steel Frame
Screw Driver Not Included
Crated Dimensions: 67" X 168" X 30" H and 2152 Lbs
Options:
- R200A - Additional Beam Assembly
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
MOTOSIERRA 28 PULG
PARTE # MK-DCS730128 – MOTOSIERRA – 700 MM (28”) – 72.6 MLNueva con garantíaESPECIFICACIONES TECNICASCadena: Paso de la cadena : 3/8", Grosor del diente: 0,058"Desplazamiento: 72,6mLPoder del motor: 4,2kW / 5,7PSTanque de combustible: 0,75LTanque de aceite para la cadena: 0,42LPeso de la cabeza: 6,3kg (13,89lbs)Para un corte profesional con sierra de cadena ergonómicamente diseñada.Filtración mejorada a través del sistema maestro de filtro de aire.Encendido simple mediante una semia...
AMXmachinery
CALIPER DE BOLSILLO – STARRETT 1025
PARTE: 2EB-STA-1025-6 – CALIPER DE
BOLSILLO – STARRETT 1025
NUEVO CON GARANTIARange 0
in to 4 3/4 in, Graduations 1/32 in, 1/64 in, Accuracy /-0.003 in, Material
Stainless Steel, Dimension Type Fractional Inch, Graduations - Lower Scale 1/32
in, Graduations - Upper Scale 1/64 in, Jaw Actuation Type Slide, Jaw Depth 1
3/8 in, Maximum Measurement - Decimal Inch 4.75 in, Maximum Measurement -
Fractional Inch 4 3/4 in, Measurements Inside, Outside, Measures Depth No,
Measures Inside D...
AMXmachinery
EXTRACTOR DE TURBINA - MOTOR 1 HP - S&P
PARTE:
AMX-10048 - EXTRACTOR DE TURBINA - MOTOR 1 HP - S&P
USADO - MUY BUENAS CONDICIONES
MARCA S&P
MODEL: CSB-1300
MOTOR 1 HP, 127/220V, 1 FASE, 60 HZ
AMPS: 17.3 / 9.5
3535 RPM
VOL. 1300 M3/H
HECHO EN MEXICO
ENTRADA: 5-1/2” DIAMETRO
SALIDA RECTANGULAR: 5” ALTO X 4” ANCHO
MEDIDAS TOTALES: 46 CM ANCHO X 38 CM FONDO X 57 CM ALTO
AMXmachinery
SIERRA VERTICAL ELCON SUPRA
SIERRA ELCON SUPRA 18000 MM X 3500 MM X 120 MMFollowing up on last weeks custom built Elcon. The spotlight is on the SUPRA, a horizontal panel saw. Specifically made to handle ultra large panels with sizes of up-to 18m x 3,5m. It cuts through various kinds of materials with thicknesses of up-to 120mm.The machine in the picture is in use by NAFFCO FZCO in the UAE, a world leader in firefighting equipment. Contact us for more information. Elcon, precisely for you.