Identificador: 248
Abierta
Descripción
PARTE # 32QD-MB4013GH - MOLDURADORA 4 CABEZALES - 20-130 MM ANCHO
PARTE # 32QD-MB4016GH - MOLDURADORA 4 CABEZALES - 20-160 MM ANCHO
PARTE # 32QD-MB4018GH - MOLDURADORA 4 CABEZALES - 20-180 MM ANCHO
PARTE # 32QD-MB4023GH - MOLDURADORA 4 CABEZALES - 20-230 MM ANCHO
FEATURES
Model | 32QD-MB4013GH | 32QD-MB4016GH | 32QD-MB4018GH | 32QD-MB4023GH |
Planing width | 20-130mm | 20-160mm | 20-180mm | 20-230mm |
Planing thickness | 10-100mm | 10-100mm | 10-100mm | 10-100mm |
Feeding speed | 10-30m/min | 10-30m/min | 10-30m/min | 10-30m/min |
Spindle speed | 6000rpm | 6000rpm | 6000rpm | 6000rpm |
Spindle diameter | Φ40mm | Φ40mm | Φ40mm | Φ40mm |
Air Pressure | 0.3-0.7Mpa | 0.3-0.7Mpa | 0.3-0.7Mpa | 0.3-0.7Mpa |
Up feed WheelΦ | Φ140mm | Φ140mm | Φ140mm | Φ140mm |
Down feed WheelΦ | Φ100mm | Φ100mm | Φ100mm | Φ100mm |
Up cutter Φ | Φ80mm-Φ110mm | Φ80mm-Φ140mm | Φ80mm-Φ140mm | Φ80mm-Φ140mm |
Down cutter Φ | Φ80mm-Φ110mm | Φ80mm-Φ140mm | Φ80mm-Φ140mm | Φ80mm-Φ140mm |
Left cutter Φ | Φ80mm-Φ110mm | Φ80mm-Φ140mm | Φ80mm-Φ140mm | Φ80mm-Φ140mm |
Right cutter Φ | Φ80mm-Φ110mm | Φ80mm-Φ140mm | Φ80mm-Φ140mm | Φ80mm-Φ140mm |
Up cutter motor | 4KW | 5.5KW | 7.5KW | 7.5KW |
Down cutter motor | 3KW | 4KW | 4KW | 4KW |
Left cutter motor | 3KW | 4KW | 4KW | 4KW |
Right cutter motor | 3KW | 4KW | 4KW | 4KW |
Beam Lifting motor | 0.75 KW | 0.75 KW | 0.75 KW | 0.75 KW |
Feeding motor | 2.2 KW | 2.2KW | 2.2KW | 2.2KW |
Total power | 15.95KW | 20.45KW | 22.45KW | 22.45KW |
Overall dimension | 2450*1300*1600mm | 2900*1400*1650mm | 3200*1550*1650mm | 3000*1700*1600mm |
Weight | 1400kg | 1600kg | 1800kg | 1900kg |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CEPILLO 12.5" PORTATIL
PARTE # SIL-DC-CM12.5-B - CEPILLO 12.5" PORTATILMOTOR: 2 HP, 110V, 60 Hz, 1 FASECAPACIDAD DE CORTE: 12.5" X 6"MAX. PROFUNDIDAD DE CORTE: 12.5" X 1.2MM, 3.2 MM X 5"VELOCIDAD DE CABEZAL: 6500 RPMCORTES POR MINUTO: 13,000CANTIDAD DE CUCHILLAS: 2 PIEZAS (DOBLE FILO)PESO: 34 KGSTIPO DE EMPAQUE: 1 CAJA
AMXmachinery
SLICER - REBANADORA - 8 PIES DE LARGO
PARTE: 11761 - SLICER - REBANADORA - 8 PIES DE LARGO
8 - SLICER
(REBANADORA) PARA CORTE DE .5 MM HASTA
6MM MARCA IND. G.H. PARA CORTE DE MADRA DE 8 PIES HASTA 18 PULGADAS DE
ANCHO
AMXmachinery
PARTE: 12352 – TRITURADORA - CARTON – CON TRANSPORTADOR – BLOAPCO
PARTE:
12352 – TRITURADORA - CARTON – CON TRANSPORTADOR – BLOAPCO
SIN
COMPACTADORA
USADO EN BUENAS CONDICIONESDESIGNED TO SHRED
CORRUGATED SHEETS AND BOXES, OVERSIZED FLAP CUTS AND DIE PRESS WASTE TO SMALL IRREGULAR PIECES...APPROXIMATELY 5" X 8" PIECES. BOTTOM DISCHARGE
OUTLET FEEDS SHREDDED MATERIALS INTO CHUTES BINS, COMPACTORS, OR PNEUMATIC
SCRAP HANDLING SYSTEMS. IT HAS THE CAPACITY TO HANDLE 300 POUNDS PER HOUR PER
HORSEPOWER WHEN HANDLING CORRUGATED BOARD MATERIALS.
AMXmachinery
PARTE: 12474 - PINCH ROLLER - EVANS
PARTE: 12474 - PINCH
ROLLER - EVANS
USADA - BUENAS CONDICIONES
Safety Gates on In-Feed and Out-Feed
Solid Top and Bottom Rollers
Feed Rate: 50’ FPM
Maximum Width: 62”
Maximum Thickness: 2”
Thickness adjustable by spacers
Work Height: 30-1/2”
Drive Motor: 1/2 HP
Electrical: 120 V, 1 PH,
60 Hz
Air Requirement: 100 PSI