Identificador: 1519
Abierta
Descripción
PART: 2CK-HR66-E - DUAL BAND TWIN BAND HORIZONTAL BAND RESAW
2 MOTORS 20 HP - 11.8” WIDE X 9.8” HEIGHT
NEW WITH WARRANTY
With 2′ digital readout control panel
Hydraulic blade tension
Saw wheel elevation is driven by motor
Conveyor is driven by hydraulic motor
|
Max. board/cant size |
11.8″
(W) x 9.8″ (T) |
|
Distance from upper blade to conveyor table |
.79″
– 6.7″ |
|
Distance from lower blade to conveyor table |
.47″
– 4.9″ |
|
Conveyor belt size |
11.2″
x 215.7″ |
|
Diameter of saw wheel |
28″ x 1″ wide |
|
Variable feed speed |
0
– 68 FPM |
|
Saw blade size |
168″ x 1″ x 2 pcs. |
|
Motor |
20 HP x 2 pcs. |
|
Gear box motor |
1/4 HP x 2 pcs. |
|
Dust hood |
4″ x 2 pcs. |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA MULTIPLE - DE VAIVEN - CORTE DELGADO
PARTE: 2OG-ECO - SIERRA MULTIPLE - DE
VAIVEN - CORTE DELGADO - ECO-POWER
NUEVA CON GARANTIAGlue-Ready Slats with
Minimal Saw Kerf Waste The Power Plus Thin
Cutting machine has a sturdy, solid cast iron base and is equipped with a 15kW
(20 HP) main motor. Cuts solid wood blocks into glue able slats with minimal
saw kerf waste.The machine can run
products up to 250mm in height (10”). Provides a high
performance and quality machine for the production of veneer slats. The machine can be...
AMXmachinery
LIJADORA DE TAMBOR
PARTE # 2SM-72550 - LIJADORA DE 1 TAMBORES - 25”- 50” DE ANCHOSPECIFICATIONSSanding Capacity:Maximum Width (in): 50 (two passes)Minimum Length (in): 2-1/4Maximum Thickness (in): 4Minimum Thickness (in): 1/32Dimensions (in):46L x 27W x 53H (on stand)Drum:5 x 25 extruded aluminumDrum Speed:1740 RPMDust Hood:1- 4″ vacuum port, min. 600 CFM recommendedConveyor Motor:43 in.-lb. torque, direct drive D.C. motor, ranged variable 0-10 FPMDrive Motor (TEFC):1-3/4 HPPower Requirements110 V 20 ampShi...
AMXmachinery
PLANTA DE TRIPLAY - 1
PLANTA DE TRIPLAY - 1PARTE: 11750PARTE: 11751 - PRENSA CALIENTE DE VAPOR CON 9 PLATOS1 - PRENSA CALIENTE DE VAPOR CON 9 PLATOS Y 8
ABERTURAS MARCA IND. G.H. CON DIMENSIONES DE 60” POR 108” ACCIONADA POR UNIDAD
HIDRAULICA, EQUIPADA CON MESA DE ALIMENTACION, MOTORES DE 2 A 7.5 HP ASI COMO
15, 30 Y 40 HP CON RELOJ DIGITAL PARA EL TIEMPO DE PRENSADO CON UN RANGO DE 1 A
30 MINUTOS, CON BOMBAS HIDRAULICAS EN EL INTERIOR DE DIFERENTES CAPACIDADES DE
5 A 20 HP.PARTE: 11752 - ENGOMADORA DE 40”...
AMXmachinery
EXTRACTOR DE TURBINA - 1 HP - S&P
PARTE: AMX-10135 - EXTRACTOR DE TURBINA - 1 HP - S&P
USADO - BUENAS CONDICIONES
MEDIDAS: ANCHO 20” X 12” FONDO X
18” ALTO
ENTRADA REDONDA 5”
SALIDA REDONDA 4-3/4”
1 HP, 220/440V, 3 FASES
6,500.00 MXN