Identificador: 1587
Abierta
Descripción
PARTE: 12340 - COMPRESOR DE TORNILLO - 30 HP
USADO - MUY BUENAS CONDICIONES
CoAire CHSA-30
230/440V, 60 Cy, 3 Phase
Main Motor: 30 HP
Discharge Pressure: 150 PSI
Air Delivery: 100 CFM
Compressor Speed: 3050 RPM
Ambient Temperature: 32 Deg. - 115 Def. F
Driving Method: V-Belt (3VX4)
Oil Sump Capacity: 5 Gallons
Dimensions: 55-1/2" L x 40-3/8" W x 48-1/2" H
Weight: 1232
Filters have been replaced, its been flushed out and has new oil.
The last hours recorded on the inside panel are 35,147, they may have gone up since it was serviced last
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
DEBARKER CAMBIO 30”
PARTE # 11606 - DEBARKER – SODERHAMN/KOCKUMS - CAMBIO RING 30”EN BUENAS CONDICIONES DE OPERACIONSimple band style ring tensionHydraulic powered feed rolls
AMXmachinery
MOLDURADORA 4 CABEZALES
PARTE # 32QD-MB4013GH - MOLDURADORA 4 CABEZALES - 20-130 MM ANCHOPARTE # 32QD-MB4016GH - MOLDURADORA 4 CABEZALES - 20-160 MM ANCHOPARTE # 32QD-MB4018GH - MOLDURADORA 4 CABEZALES - 20-180 MM ANCHOPARTE # 32QD-MB4023GH - MOLDURADORA 4 CABEZALES - 20-230 MM ANCHOFEATURESModel32QD-MB4013GH32QD-MB4016GH32QD-MB4018GH32QD-MB4023GHPlaning width20-130mm20-160mm20-180mm20-230mmPlaning thickness10-100mm10-100mm10-100mm10-100mmFeeding speed10-30m/min10-30m/min10-30m/min10-30m/minSpindle speed6000rpm6000rpm6...
AMXmachinery
TALADRO MULTIPLE - 13 TALADROS – VERTICAL – MANUAL
PARTE
# RT-R113 – TALADRO MULTIPLE - 13 TALADROS – VERTICAL – MANUAL
Nueva con garantía
Fotos y Características:
3/4
HP Spindle Drive Motor, TEFC
60″
Back Fence Assembly
(1)
13-Vertical Gear Driven Spindle Rows
10mm
Bored Collets
(7)
Right Hand, (6) Left Hand
(2)
Index Pins
20″
X 48″ Work Table Surface
Wired
1-Phase 120 Volt, 60 Hz.
Manually
Actuated Boring Cycle
Tooling
Not Included
Crated
Dimensions: 45″ X 80″ X 44″ and 508...
AMXmachinery
SIERRA MULTIPLE – 6 SIERRAS – NEWMAN KM16
PARTE: 12208 – SIERRA MULTIPLE – 6 SIERRAS
– NEWMAN KM16
USADA – BUENAS CONDICIONES
MOTORES 5 HP, 230/460V, 3 FASES