Identificador: 2213
Abierta
PARTE: 12497 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS DE 12” DIAMETRO - PISTORIUS
AMXmachinery
Descripción
PARTE: 12497 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS DE 12” DIAMETRO - PISTORIUS
USADA - BUENAS CONDICIONES
2 MOTORES DE 1 1/2 HP 3450 RPM
SIERRAS DE 12"
PEDAL NEUMÁTICO
VARIADOR DE VELOCIDAD DE CORTE
VOLTAJE 208-230/460
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ASTILLADORA ESTACIONARIA – 30 HP – WEIMA
PARTE: 12271 – ASTILLADORA ESTACIONARIA – 30 HP –
WEIMA
USADA – MUY BUENAS CONDICIONES
Rotor Dia.: 9.9″
Rotor Width: 31.5″
Rotor Speed: 60-100 RPM
Motor: 30 HP
Screen : 10-40mm
Model: WL6
AMXmachinery
PARTE: 11787 – LIJADORA DE CEPILLOS Y DISCOS - TIMESAVERS
PARTE: 11787 – LIJADORA DE CEPILLOS Y DISCOS - TIMESAVERSEn buenas condicionesModelo: 337-6RPRotary polisher has six (6) 1/2HP counter-rotating arbors with fladder-style abrasives.Rotation 12-35 RPM, 2HP variable feed 15-45 FPM on conveyor belt with vacuum bed. (Less vacuum pump unit).36” width capacity. Each arbor/spindle is 12”-long x 2”-diameter, arbor speed 100-1200 RPM, with LED readout on RPM. 0” – 6” motorized part thickness opening.Infeed and outfeed pinch rolls.Wired 460V...
AMXmachinery
ENLAZADORA DE CAJONES - DODDS
PARTE:
12369 - ENLAZADORA DE CAJONES - DODDS
MUY BUENAS CONDICIONES -
COMO NUEVABrand: DoddsModel: SE-1-25AFCondition: Very GoodYear: 2019Voltage: 220/1/Condition: Very GoodWith automatic feed of the cutter for dovetailing standard
English dovetails on one or two inch centerlines.Servomotors control the automatic feed with the consistency
and reliability of servo components.Simple operationSpindle movement controlled by servomotors.Touch screen operator interface.Servo controls for co...
AMXmachinery
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"Nueva con garantíaPara palos de escoba, trapeadores y recogedoresAlta produccionCapable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use ...