ID: 2457
Open
Description
PARTE: 12571 - SIERRA MULTIPLE - MOTOR 30 HP - RAIMANN
USADA - MUY BUENAS CONDICIONES
FLECHA LARGO: 23” CON RISCA
FLECHA DIAMETRO: 2.5”
DIAMETRO DISCOS: 12”
MFG: 2001
MOTOR 30 HP, 460V, 3 FASES, 60 HZ, 70 AMP - FALTA CONFIRMAR LOS 30 HP
PESO MAQUINA: 2,000 KG
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 2CK-P20HV - CEPILLO - 1 CARA - CAPACIDAD 20” ANCHO - 5 HP - CABEZAL ESPIRAL
PARTE:
2CK-P20HV - CEPILLO - 1 CARA - CAPACIDAD 20” ANCHO - 5 HP - CABEZAL ESPIRAL
Nuevo con garantía230/1/60
electrics - 1 Fase
230/3/60
electrics) - 3 Fases
DESCRIPTION
SPECIFICATION
Maximum planing width
20″
Maximum planing thickness
8-5/8″
Feed speeds (2)
20 & 30 FPM
Main motor
5 HP
Cutterhead diameter
3-1/...
AMXmachinery
PARTE: 2SP-S-2415 - TRITURADORA - ASTILLADORA - MOTOR 15 HP - ENTRADA 24” LARGO X 36” ANCHO
PARTE: 2SP-S-2415 - TRITURADORA - ASTILLADORA - MOTOR 15 HP - ENTRADA 24” LARGO X 36” ANCHO PARA MADERA, MDF, PLYWOOD, COMPOSITES, PAPEL, CARTON, ETC.NUEVO CON GARANTIA24" wide cutterhead block, 24" wide x 36" deep inlet hopper.15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.Generates solid material into approximately 3/8" x 1" sizes.A robust fabrication design built for many years of daily, commercial use s...
AMXmachinery
PARTE: 12172 – TORNO COPIADOR - LOCATELLI BIG ARRIET
PARTE: 12172 – TORNO COPIADOR - LOCATELLI BIG ARRIET
USADO
– BUENAS CONDICIONESFully operationally
over
$9,000 in steady rests and tooling
max.
capacity 4" dia. x 6" length
Sequence
as follows;
roughing
knife
steady
rest
traveling
roughing knife
second
roughing pattern knife
finishing
pattern knife
parting
knife
Also
....if needed
end
boring bit or formed bit
second
end boring bit or formed knife with side sliding movementLocatelli Dime...
AMXmachinery
ESCOPLO – MESA MOVIBLE – 1 LADO - MAKSIWA
PARTE: 2MK-FH.16.C - ESCOPLO – MESA MOVIBLE – 1 LADO - MAKSIWAMobile table, appropriate to drill horizontally in wood with straight cutter or drill. It has eccentric clamping device, articulated arms and extended base. It is conceptually different from the other drills in that during operation, the table is lifted into the work piece. 2 Year Warranty. SpecificationsMobile table dimensions: 18-1/8" x 7-4/8"Horizontal table track: 5-3/8"Vertical table track: 8-5/8"Chuck track: 4-7/8"Chuck cap...