Identificador: 1673
Abierta
.jpg)
.jpg)
Descripción
PARTE: 1ND-NFP-S500 – MOTOR 5 HP, 16 BOLSAS – 3000 CFM – ENTRADA 250 MM – 2 SALIDAS
PARTE: 1ND-NFP-S750 – MOTOR 7.5 HP, 24 BOLSAS – 4500 CFM – ENTRADA 280 MM – 3 SALIDAS
PARTE: 1ND-NFP-S1000 – MOTOR 10 HP, 24 BOLSAS – 5000 CFM – ENTRADA 400 MM – 3 SALIDAS
Nuevo con garantía
MOTORES 220/440V, 3 FASES
DESCARGA CON BOLSAS
OPCIONAL:
MOTORES 1 FASE
DESCARGA CON BARRILES
DESCARGA CON BIN
Applications:
High Speed Routing • Sawing • Cutting • Single ‘Cell’ Manufacturing • After-Filters
Features:
• Three or single phase
• Easy installation
• Small footprint
• Multiple U.S. assembly points
• Quiet operation
• Bag material collection
(barrel or bin option)
• Patented SuperBags (99.9% efficiency)
• Multiple waste collection options
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12572 - PRENSA DE RADIO FRECUENCIA - OGDEN
PARTE: 12572 - PRENSA DE RADIO FRECUENCIA - OGDEN
USADA - BUENAS CONDICIONES
Curing
area: 36” x 60” x 2” thick.
Clamping
pressure is applied by multi-power (dual pistons on a common shaft) pneumatic
cylinders to maximize pressure while relying on standard plant pressures.
Unlike presses without multi-power cylinders, which require booster
compressors, the Model SL36x60 reaches full capacity at 100-psi plant air
pressure.
Edge
pressure is applied by eight (8) each pusher ...
AMXmachinery
MOLDURADORA 6 CABEZALES
PARTE # 12WG-POWERMAT 600 - MOLDURADORA - 6 CABEZALESMOLDURADORA AUTOMATICA6 CABEZALESCARACTERISTICAS GENERALES:KW (HP) rpm Tool cutting circle1 - 7,5 (10)2 - 15 (20)3 - 15 (20)4 - 11 (15)5 - 11 (15)6 - 11 (15)Tool arrangement BRLTTBWorking width: 20 - 230 MMWorking height: 10 - 120 MMFeed Speed-variable with inverter 5 - 30 m/min
AMXmachinery
ARMADORA DE SILLAS - LANCASTER
PARTE: 12384 - ARMADORA
DE SILLAS - LANCASTER
USADA – BUENAS
CONDICIONESMax opening between jaws (front/back) 32"Max opening between jaws (side/side) 26"Max opening between clamping jaws on side clamp assembly
24"(2) horizontal adjustable swivel side clampsPneumatic clamping cylinders with 5" stroke(1) horizontal adjustable side to side clamp Pneumatic
clamping cylinder with 5" strokeManual traverse of end clamping jaws Bottom chair leg support
table
Foot ped...
AMXmachinery
ASTILLADOR SCHUTTE
PARTE # 11802 - ASTILLADOR - SCHUTTE 1360IN GOOD CONDITIONS, AS-ISTop infeed is 21-1/2" x 23".Currently has 1" thick swinging hammers. Screen included (not installed) has 1/2" dia. round holes. Has been modified to a pneumatic discharge.Includes sub base, motor pedestal and permanent magnet installed in infeed chute.