Identificador: 426
Abierta
Descripción
PARTE: 1SL-DC-J4-400-3 - CORTADORA DE METAL PARA DISCO 16"
MOTOR: 4 HP, 220V, 3 FASES, 60 HZ
VELOCIDAD DISCO: 2,800 RPM
TRANSMISION: DOBLE BANDA
INCLINACION PRENSA 45 GRADOS (IZQ Y DER)
DIAMETRO DEL DISCO: 16" X 1" X 1/8"
DIAMETRO FLECHA: 1"
PESO: 90 KGS
CAPACIDAD DE CORTE:
TUBO: 5" DIAMETRO X 1/4 ESPESOR PARED
ANGULO: 6" X 4" X 3/8"
SOLIDO: 1-1/2" DIAMETRO
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12315 - PRENSA DE TABLEROS - 20 SECCIONES TAYLOR
PARTE: 12315 - PRENSA DE
TABLEROS - 20 SECCIONES TAYLORUSADA – MUY BUENAS
CONDICIONES
SEMIAUTOMATICA
20
section
8.5 ft wide
Pneumatic 120 Clamps
Swing-Style
Semi-Automatic Front-End
32" Long Clamps 8.5` Wide Machine
Pneumatic Rotation with
Foot-Pedal Controls
AMXmachinery
PARTE: 2EB-DK2 - ASTILLADOR A GASOLINA – 14 HP – MAX DIAMETRO 6.25”
PARTE:
2EB-DK2 - ASTILLADOR A GASOLINA – 14 HP – MAX DIAMETRO 6.25”
NUEVA CON GARANTIAFeatures
dual swing chutes, 13-inch cutting blades, DOT road-legal tires, and a 36-inch
extended axle. The load chute is pickup truck height and the engine is covered
by a Commercial Command Pro 3-Year Kohler warranty.The
14 HP Kohler Commercial engine has an RPM of 3,600, and the dual 13-inch
cutting blades auto-adjust to pulverize brush and up to 6.25-inch diameter
trees. For increased longevi...
AMXmachinery
PARTE: 12433 - MOLDURADORA - 6 CABEZALES - LEADERMAC COMPACT 623
PARTE:
12433 - MOLDURADORA - 6 CABEZALES - LEADERMAC COMPACT 623USADA - BUENAS
CONDICIONESVoltage: 550/3/60CSA Hydro approvedHead Sequence: Bottom, Right Side, Near Side, 1st
Top, 2nd Top, 2nd Bottom9 1/16” x 6” CapacityInfeed Straightening Table -Sound EnclosureTotal H.P. 95.75 - Largest H.P. 20Total Amperage 107.2
40 mm Dia Spindles
AMXmachinery
FINGER JOINT GRECON TURBO
PARTE # 11770 – SISTEMA FINGER JOINT – GRECON TURBOEn buenas condiciones de operaciónManufactura: 2000Technical designPackage systemHorizontal jointVertical joint Number of milling units: 2Workpiece width max mm: 205Workpiece thickness max mm: 80Infeed length max mm: 1.000Infeed length min mm: 150Package width mm: 600Pressing length mm: 6.100Total pressure kg: 12.000Capacity m/ shift: 16.000Capacity of router cycles/min: 6,5Transfer capacity parts/min: 120Capacity of press cycles/min: 7Loa...