Identificador: 2072
Abierta
Descripción
PARTE: 2EN-E2410 - COLECTOR ASERRIN - MOTOR 10 HP - 5,000 CFM
NUEVO CON GARANTIA
• Fan 10 HP
• 5,000 CFM
• Total Static Pressure 8"wg
• Filter Bags/Area qty/SF 24/371
• Discharge 2 Bags
• Variable Frequency Drive (VFD) at 10 hp and 460V
• Add Pressure Transducer Kit Recommended with VFD
• Vibratory Cleaning Device (VCD) with 460 V momentary starter, Aids in filter cleaning
• Fan Inlet Adapter with 4" Branch and Manual Gate
• Shop Vac Hose Kit 4" x 15' Flex Hose Recommended with Fan Inlet Adapter
• Pre Wired Electrical Package Unistrut Mount Disconnect L22 Plug
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2CK-P24HV - CEPILLO - 1 CARA - CAPACIDAD 24” ANCHO – 7.5 HP - CABEZAL ESPIRAL
PARTE: 2CK-P24HV - CEPILLO - 1 CARA - CAPACIDAD 24” ANCHO – 7.5 HP - CABEZAL ESPIRAL
Nuevo con garantía230/1/60
electrics - 1 Fase
230/3/60
electrics) - 3 Fases
DESCRIPTION
SPECIFICATION
Maximum planing width
24″
Maximum planing thickness
8″
Feed speeds (2)
20 & 30 FPM
Main motor
7.5 HP
Cutterhead diameter
3-3...
AMXmachinery
PARTE: 12213 – SIERRA CINTA – CON ALIMENTADOR – SCMI 900-SC
PARTE: 12213 – SIERRA CINTA – CON ALIMENTADOR – SCMI
900-SC
USADA – BUENAS CONDICIONES
220V, 3 FASES, 60 HZ POR CONFIRMAR: VOLANTES 36" DIAMETRO, MOTOR DE 9 HP
AMXmachinery
ESPIGADORA DOBLE - DE MESA - CAPACIDAD 6 - 8 PIES - DT-610
PARTE: 2DO-DT610 - ESPIGADORA DOBLE - DE MESA - CAPACIDAD
6 - 8 PIES - DT-610
NUEVA
CON GARANTIAESCUADRA
Y CORTA A LARGO, ARRIBA Y DEBAJO DE LA PUERTA O TABLERO2
SIERRAS CORTA2
SIERRAS SCORING
CORTE
LIMPIO EN AMBOS LADOS
Features and Benefits:
Easy to load table -
Safely locks in place while loading.
One operator can easily
load the door or panel - Greater efficiency.
One stationary head and
one movable head - Easy to change.
Fixed side, saw tilts;
Mova...
AMXmachinery
TROMPO CON ALIMENTADOR CNC
PARTE # 2AM-540 - TROMPO CON ALIMENTADOR INTEGRADO - CNC - PARA MOLDURAS RECTAS Y CURVASShaper Motor: 7.5hp 208-230v 3phShaper Speed: 4000 to 7000 rpmSpindle Size: 1 1/4"Feed Speed: Variable to 30 fpmConveyor: 6" wideMax. Part Thickness: 2"Floor Space: 55"w X 38"dPlantilla Centradora para curvas - opcionalNew CNC controlled Model 540 shaper is based on the Model 390 - a proven, reliable workhorse for over 10 years. The 540 was designed to machine arched panels and rails for cabinet...