Identificador: 358
Abierta
Descripción
PARTE: 2NT-NTCS24L – SIERRA TRONZADORA – DISCO 24” – MOTOR 15 HP – IZQUIERDA – LEFT
PARTE: 2NT-NTCS24R – SIERRA TRONZADORA – DISCO 24” – MOTOR 15 HP – DERECHA – RIGHT - OPCIONAL
Nueva con garantía
CARACTERISTICAS
Capacidad máxima de corte: 2" x 21", 4" x 19", 6" x 15", 8" x 8"
15 HP motor, 3PH 230V with 24V magnetic controls
24” Carbide tipped blade included
1” Saw arbor diameter
Cycle operation: Pneumatic
Quick access on front of the machine to adjust blade stroke.
Safety interlock on blade access door
Table size: 28-3/4” x 45”
2100 RPM
Net / Gross weight: 1,285 lbs. / 1,458 lbs.
Machine dimensions: (L) 32" x (W) 45" x (H) 56"
Packing dimensions: (L) 36" x (W) 51" x (H) 61"
(1) Tool box and manual
Warranty is one year parts
All machines are tested stateside prior to shipment providing trouble free start up.
Shipping Dimensions 8' In feed 8' Out Feed: 100'' x 28'' x 19'' 235 Lbs.
DATOS TECNICOS:
Main Motor Hp. = 15 hp.
Voltage/ Freq. = 230 Volt 60Hz
Phase = 3 Phase
Amp Requirement = 32 Amps
Electronics = CE Approved Components
Dual Voltage = 230/460 Volt
Control Voltage = 24 Volt Control Voltage
Assisted Start = Wye Delta
Pass-Line = 34''
Cut Envelope = 2'' x 21'' 8'' x 8''
Max. Width = 2'' x 21''
Max. Thickness = 8''
Arbor Rpm = 2100
Blade Size = 24'' Tungsten Carbide Tipped
No. of Teeth = 120 Tooth
Tooth Spacing = 5/8 In.
Blade Kerf = 4 mm
Dust Collection = (2) 4'' @ 900 CFM
Dust Port Out = 4'' Top 4'' Bottom
Arbor Diameter = 1'' Arbor
Cycles/Minute = 40 Cuts Per Minute
Hold Down Style = T Clamp
Emergency Stop = Push Button
Safety Feature = Safety Interlock Switch
Guarding = Full Guard with Clear View
Operation Style = Pneumatic Foot Pedal
Fence Type = Adjustable Fence
Fence Dims. = 2" x 25''
Adjust. Stroke = 7-3/4'' Adj. on Arbor Stroke
Frame Const. = 1/4'' Steel Construction
Worktable Dims. = 28-3/4'' x 45''
Table Const. = Cast Iron
Decible Rating = 68 dB
Net Weight = 1285 Lbs.
Gross Weight = 1458 Lbs.
Machine Dims. = 31-3/4'' x 45'' x 56''
Packaging Dims = 36'' x 51'' x 61''
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2TA-PT-13HF-GN – GENERADOR - ALTA FRECUENCIA 13 KW
PARTE: 2TA-PT-13HF-GN – GENERADOR - ALTA FRECUENCIA 13 KWNew with warrantyFor mass productions, 2 to 3 minute per cycle for drying or bending the wood projectVarieties of wood bending shapes are able to produce.Press one large part, slicing into many small pieces for high productivity.Meet all kinds of furniture fabrications.One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.Using wooden mold instead...
AMXmachinery
PARTE: 12598 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZL-34 DELTA
PARTE: 12598 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZL-34 DELTAUSADA – BUENAS CONDICONESFISHER+RUCKLE FZL-34 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 3400 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 1998400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead times durin...
AMXmachinery
REASERRADORA HORIZONTAL - 2 BANDAS - ANCHO 8” - (2) 15 HP - REGRESADORA
PARTE:
2FA-RM6X6-2 - REASERRADORA HORIZONTAL - 2 BANDAS - ANCHO 8” - (2) 15 HP - REGRESADORA
NUEVA CON GARANTIA- ¼” – 6” Tall Cut Height, 8”
Wide, Unlimited Length Capacity- 4” Dust Connection (No dust
collector required)- Heavy Duty 2-7/16” Blade
Arbors and Bearings- 20” Band Wheels- Air Tensioned Blade
Mechanism- Powered Belt Return w/
Adjustable Height Sheer Plate- Self- contained Hydraulic
System: Adjustable Infeed Speed (0-150 ft/ min)- Easy Crank for Adjustable
...
AMXmachinery
SECADORES
SECADORES CON AIRE REFRIGERADOModeloCapacidadDiámetro de Entrada del Tubo de Aire32IG-FN-7.5F1.0 m3/min1"32IG-FN-10F1.5 m3/min1"32IG-FN-15F2.0 m3/min1" 1/4"32IG-FN-20F2.5 m3/min1" 1/2"32IG-FN-30F3.6 m3/min1" 1/2"32IG-FN-50F6.5 m3/min2"32IG-FN-75F8.8 m3/min2" 1/2"32IG-FN-100F12.5 m3/min3"32IG-FN-150F20 m3/min3"32IG-FN-200F28 m3/min4"- El gas refrigerante puede ser cualquiera de los siguiente: R22,R407C, R134A