Identificador: 285
Abierta
.png)
.jpg)
.png)
Descripción
PARTE # 2TA-BS-1616HR - REASERRADORA HORIZONTAL – 1 SIERRA
NUEVA CON GARANTIA
| Specifications | BS-1616HR |
|---|---|
| Max. Cutting Capacity | 16½" x 16-1/8" (420 x 410 mm) |
| Distance Between Blade to Conveyor | ¼" x 10-5/8" (5 ~ 270 mm) |
| Minimum Cut Thickness | ¼" (5 mm) |
| Saw Wheel Diameter | 32" (800 mm) x 2 |
| Saw Blade Length | 231" ~ 231.1" (5860 ~ 5870 mm) |
| Saw Blade Width | 2" (50 mm) |
| Saw Blade Speed | 6150 FPM |
| Conveyor Belt Sizes (W x L) | 16" x 165½" (400 x 4200 mm) |
| Feed Speed (Variable) | 40" (1016 mm) |
| Return Conveyor Size | 100-3/8" x 24¾" x 32½" (2550 x 630 x 825 mm) |
| Conveyor Height From Floor | 40" (1016 mm) |
| Return Conveyor Motor / Inverter Motor | 1HP 3Ø / 2HP 3Ø |
| Saw Wheel Motor | 30 HP |
| Blade Lift motor | ½ HP |
| Dust Hood Outlet Diameter | 4" (100 mm) x 2 |
| Machine Dimension (L x W x H) | 128" x 130" x 79" (3250 x 3300 x 2000 mm) |
| Packing Dimensions (L x W x H) | 108" x 89" x 87" (2750 x 2250 x 2200 mm) |
| N. W. | 4321 LBS (1960 kg) |
| G. W. | 4763 LBS (2160 kg) |
- Machine was built with ruggedly constructed throughout for maximum stability, high precision cutting and minimum trouble.
- It is equipped with a digital controller for convenient and accurate thickness setting.
- The feed conveyor has a tilting design allowing for maximum 30 degree bevel cuts.
- When the feed conveyor is tilted for bevel cutting a side support is applied for safe and stable cutting operations.
- Variable feed speed is controlled by a frequency inverter for best cutting requested.
- The infeed and outfeed pressure rollers are easily raised or lowered by a gear rack.
- The infeed and outfeed pressure rollers are spring loaded and easily adjusted for the horizontal or vertical direction to suit various workpiece thicknesses.
- Blade tension is adjusted by means of a hand wheel.
- A tension scale allows the operator to correctly adjusted the tension for different blade thickness.
- The cast iron saw blade wheel is dynamically balanced for smooth running.
- Blade guard is easily lifted up, supported by two nitrogen gas cylinders for convenient blade change.
- The roller type return conveyor equipped at left side of the machine provides easily repetitive cutting.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PROFILE KNIFE GRINDER
PART: 2TA-TG-9330-E - PROFILE KNIFE GRINDER
NEW WITH WARRANTYFEATURES:
Economical model for small shop.
Work table back to front, left to right is moved on linear
bearing cross roller rail sets, accuracy and durability.
Grinding wheel head is micro adjustable and accurate. 2 HP
variable speed control motor for powerful grinding.
Easy setup template holder for accurate copy tracer.
Knife-edge angle is adjusted by dovetails are grooved;
grinding center is never c...
AMXmachinery
GUILLOTINA DOBLE HOJA
PARTE # 11931 - GUILLOTINA DOBLE HOJA - MONGUZZIMod. TRM 2L 2.600Capacidad de corte 2.700 mm.Ancho máx de corte 520 mm.Ordenador de corte con 99 programasNormas CEAño 2001
AMXmachinery
LIMPIADORA DE TABLAS PARA TARIMAS – FROEDGE 450
PARTE # 11904 – LIMPIADORA DE TABLAS PARA TARIMAS – FROEDGE 450Good conditionElectric 230 volt, 60 cycle, 3 phaseUsed to clean dust of resawn boards prior to pallet assembly.Working dimensions: Up to 8" wide, up to 6" thick and up to 8' in length.Infeed: Infeed belt conveyor 6" wide.Powered brushes to clean the boards top and bottom.Powered by 5 HP motor.Shipping 8 (length) x 5 (width) x 5 (height)Weight 1800 lbs
AMXmachinery
PARTE: AMX-10078 - AFILADOR Y TRISCADOR PARA SIERRAS CINTAS - TIMBERY SHARP-N-SET
PARTE: AMX-10078 - AFILADOR Y TRISCADOR PARA SIERRAS CINTAS - TIMBERY SHARP-N-SET
COMO NUEVO - SIN USARPARA SIERRAS CINTAS DE 1" A 1-1/2" CON 7/8" DE ESPACIO ENTRE LOS DIENTES (TOOTH SPACING)VOLTAGE 115/230 VAC
FRECUENCY: 50 - 60 HZ
PHASE 1
FULL LOAD AMPS: 5.0 / 2.5 A
DIAGRAM # 5520-989MANUAL DEL USUARIO INCLUIDO