Identificador: 1142
Abierta
Descripción
PARTE: 4EL-M125400 – SIERRA VERTICAL – 1250 X 3300 MM - ELCON 125 EDGE
PARTE: 4EL-M155400 – SIERRA VERTICAL – 1550 X 3300 MM - ELCON 155 EDGE
PARTE: 4EL-M185400 – SIERRA VERTICAL – 1850 X 3300 MM - ELCON 185 EDGE
PARTE: 4EL-M220400 – SIERRA VERTICAL – 2200 X 4300 MM - ELCON 220 EDGE
The New EDGE.
Trendy and eye catching design and well equipped.
Looking like a picture in a frame, the all new Edge was developed from scratch. It features a new and lighter frame, yet it is still as rigid as it’s bigger brothers. Ensuring a long life span whilst maintaining accuracy. It comes with an automatic shifting back frame to prevent from damaging the support strips. This is done electrically, with actuators, so no compressed air needed.
It also includes XXL support blocks, large diameter foot operated bottom rollers and a user friendly mid fence to work ergonomically, in a standing position. A 3kW-S6 motor to cut through 60mm panels and manual scoring are part of the standard equipment. For workshops with limited ceiling height or working with small panel sizes, the EDGE comes in four different heights ranging from 125 up to 155, 185 and 220cm. Standard cutting lengths are 3.300 (125,155 and 185) and 4.300 (220).
Need a longer or higher EDGE? Feel free to contact us to discuss the possibilities.
The New EDGE.
Trendy and eye catching design and well equipped.
Looking like a picture in a frame, the all new Edge was developed from scratch. It features a new and lighter frame, yet it is still as rigid as it’s bigger brothers. Ensuring a long life span whilst maintaining accuracy. It comes with an automatic shifting back frame to prevent from damaging the support strips. This is done electrically, with actuators, so no compressed air needed.
It also includes XXL support blocks, large diameter foot operated bottom rollers and a user friendly mid fence to work ergonomically, in a standing position. A 3kW-S6 motor to cut through 60mm panels and manual scoring are part of the standard equipment. For workshops with limited ceiling height or working with small panel sizes, the EDGE comes in four different heights ranging from 125 up to 155, 185 and 220cm. Standard cutting lengths are 3.300 (125,155 and 185) and 4.300 (220).
Need a longer or higher EDGE? Feel free to contact us to discuss the possibilities.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
REBORDEADORA - 400W
PARTE: 2HR-64314 - REBORDEADORA 6MM (1/4") - DRILL MASTER 2.4 AMPS - 400WAC Volts: 120Accessories Included: 2 collet wrenchesAmperage (amps): 2.4Horsepower (hp): 1/2Speed (max): 26000 RPMShipping Weight: 4.55 lb.Wattage (watts): 400
AMXmachinery
ARMADORA DE MARCOS ALFA MACCHINE
PARTE # AMX-10014 - ARMADORA DE MARCOS - ALFA MACCHINE - MTRE-MITE - VN4EN BUENAS CONDICIONES DE OPERACIONTAMANO DE MESA: 12” ANCHO X 22” FONDOALTURA DE LA MESA PARA TRABAJAR: 37”PARA MARCOS DE ESPESOR: 0.197" MINIMO A 3.15" MAXIMOPARA MARCOS DE ANCHO: 0.39" MINIMO A 3.94" MAXIMONECESITA AIRE COMPRIMIDOENERGIA: 110V, 1 FASE, 60 HZTABLERO: ALFA MACHINNE – MINIGRAF 4 ELECTRONICA – PROGRAMABLE CON LECTOR DIGITALMEDIDAS TOTALES DE LA MAQUINA: 31” ANCHO X 24” FONDO X 61” ALTOVideos de...
AMXmachinery
MAQUINA DE JUNTAR LISTONES
PARTE # 2FZ-MAS130 - MAQUINA DE JUNTAR LISTONESNueva con garantíaMáquina de Juntar Listones, con equipamiento para aplicación de la cola sobre el hilo, modelo “MAC 10” y DPA con riscador.Datos TécnicosLargo máx. del panel: 3.3 mAncho máx. del panel: 1.3 mAncho min. del panel: 0.45 mEspesor máx. del listón: 40 mmLargo mín. del listón: 20 cmCapacidad de producción en metros cuadrados p/hora: 180Potencia total instalada:(con aplicador de cola MAC-10) 24 kWConsumo de aire comprimido, ...
AMXmachinery
PARTE: 12169 – SIERRA OPTIMIZADORA – DIMTER WEINIG S50
PARTE: 12169 – SIERRA OPTIMIZADORA –
DIMTER WEINIG S50
USADA – MUY BUENAS CONDICIONESVideo1: https://vimeo.com/541891991