Identificador: 230
Abierta
Descripción
PARTE # 2AM-410 - TROMPO/PULIDOR CON ALIMENTADOR INTEGRADO PARA MOLDURAS RECTAS Y CURVAS
Shaper Motor: 7.5 HP Belt Driven
Shaper Spindle Speed: 4000-7000 rpm
Shaper Spindle: 1-¼" Dia.
Sander Motors: 1.5 HP Direct Drive
Sander Spindle Speed: 400-1800 rpm
Sander Spindles: 1" Dia. by 4" Tall
Voltage: 208-240V 3ph, 30A
208-240V 1ph, 40A
440V 3ph, 15A
Conveyor: 6" Wide, 4 rows of tires
Vertical Adjustment: Yes, with digital counters
Horizontal Adjustment: Yes, with digital counters
Sanding Wheel Tilt: 60º Forward; 40º Back
Fence: 5 adjustable stops
Table Height: 36 inches
Size: 75" x 36" x 54"
Weight: 1325 lbs
Plantilla Centradora para curvas - opcional
Designed and manufactured to give years of dependable service, the Larick 410 will shape and sand a wide variety of workpieces. Features include a 6" wide feed chain with four staggered rows of hold down tires; front adjusting handwheels with digital readouts for horizontal and vertical shaper and sander positions; AC inverter controlled variable speed for shaper, sanders, and feed featuring digital readouts for speed and load; floating heads are optional which allow shaping and sanding of arched panels. The user friendly design makes setup and profile changeovers quick and easy.
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR
PARTE # 11913 - PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR8.5 ft. wide with approximately 6 clamps per sectionClamps are standard 2-1/2” high jaws by 32” openingIncludes air tightener and panel flattenerMachine was new in 1983Good conditions
AMXmachinery
Mascarilla Reutilizable De Protección Y Seguridad
PARTE: 1SIL-DC-RESP-1F - Mascarilla Reutilizable De Protección Y SeguridadProtección y seguridad contra polvosSustancias No tóxicasIncluye 1 filtro de carbón activado50 piezas por caja
AMXmachinery
SIERRA VERTICAL 50 X 120
PARTE # 2SS-H4 – SIERRA VERTICAL – MOTOR 15 AMP – CAP. 50” ALTO X 120” LARGO – 1 ¾ “ espesorPARTE # SIL-DC-SS-H4 - SIERRA VERTICAL – MOTOR 15 AMP – CAP. 50” ALTO X 96” LARGO – 1 ¾ “ espesorNUEVA CON GARANTIACORTE VERTICAL: 50"CORTE HORIZONTAL: 120" SIN LIMITEESPESOR CORTE: 1-3/4"DIAMETRO SIERRA: 8"MOTOR: 15 AMP, 120V, 220VLARGO DEL MARCO: 120"DATOS DE ENVIOPESO: 244 LBSDIMENSIONES: 120 X 11 X 70 PULGADAS
AMXmachinery
OPTICONTROL - PARA HERRAMIENTA POWERLOCK Y CONVENCIONAL - WEINIG
PARTE:
12393 - OPTICONTROL - PARA HERRAMIENTA POWERLOCK Y CONVENCIONAL - WEINIG
USADA – BUENAS CONDICIONESGREAT ADDITION FOR ANY WEINING MOULDER. MEASURES
TOOLING FOR BOTH POWERLOCK AND CONVENTIONL TOOLING. INCLUDES CARD FOR TOOL ROOMYear of Manufacture: 2006Condition: Very
GoodElectric: 110
Voltage 60 Cycle 1 PhaseModel: 970095Cutting
Circle Dia.: 0-300 mm, Tool Length: 0-310, Max. Measuring Width: 310 mm,
Non-Contact measuring of tool dimensions radius and height and their indi...