Identificador: 1815
Abierta
Descripción
PARTE: 2CK-AF19N
Is designed to allow consistent and automated feeding of material through vertical bandsaw or resaws. Is pneumatically actuated by a switch in the fence so no foot pedal is required making for a simple and convenient operation. With 10 feed speeds to choose from you can dial in the optimum feed speed for your material. Intended to be fit on bandsaws which are over 24” but could be fitted on smaller bandsaw tables, but may require an extension off the side of your bandsaw table where the feeder is mounted.
- Consistent feeding for bandsaws and resaws
- Pneumatic activation of feeding unit, no foot pedal required
- 10 feed speeds for optimum control
- Line bar roller fence is easily adjusted by rack and pinion handle
- Comes with (2) adjustable steel serrated rollers
- Can be mounted to almost any bandsaw/resaw (recommended for 24” and up)
KEY ADVANTAGES
- Heavy duty construction
- Adjustable feed wheels to accommodate for the height of your material
- Roller fence aids in feeding of material
|
|
INCH |
METRIC |
|
Feed Speeds (10) |
4/8.5/8.5/14/17/25/28/30/50/60 FPM |
1.5/2.5/2.5/4/5/7.5/8/9/15/18 M/min |
|
Roller size |
Φ6-7/8”x 1-9/16″ x 2 pcs / Cast Steel |
Φ175 x 40 mm x 2 pcs |
|
Motor |
1/2 HP (0.375 KW), 3 phase; Forward |
1/2 HP |
|
Maximum roller stroke |
8” |
200mm |
|
Fence dimensions |
16” x 7 7/8” |
400 x 200mm |
|
Max. Roller-Blade Clearance |
8 1/4” |
210mm |
|
Net Weight |
79 Kg |
176 Lbs |
|
Gross Weight |
97 Kg |
209 Lbs |
|
Packing Size |
1220 x 480 x 470mm |
48″ x 18-7/8″ x 18-1/2″ |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ASTILLADORA - HORIZONTAL - 24 X 4 PULGADAS - CON BANDA TRANSPORTADORA
PARTE: 2TA-WG-2404HC - ASTILLADORA - HORIZONTAL - 24 X 4 PULGADAS - CON BANDA TRANSPORTADORAFeatures:A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting ...
AMXmachinery1
CANTEADORA AUTOMATICA
CANTEADORA AUTOMATICA PARTE: 2CK-MX350MRIs an entry-level edgebander with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, can output high-quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. A special feature of this machine is the dual purpose end trim system which can either...
AMXmachinery1
EXTRACTOR CENTRIFUGO - EN LINEA
PARTE: 1AM - EXTRACTOR CENTRIFUGO - EN LINEAExtractor centrifugo en línea para acoplamiento en ducto de ventilación en salas de juntas, oficinas, baños, para transportar aire acondicionado en falsos plafones.Características:– Compatible con ductos de 4″ y 6″– Motores con valero y protección de térmica incluye clave y clavija.– Alimentación de 127 Volts.
Modelo
Potencia
WATTS
Volumen
PCM M...
AMXmachinery1
SIERRA TRIMMER - 60", 98" & 120" LARGO
PARTE: 2CK-CK-2200 - SIERRA TRIMMER - 60", 98" & 120" LARGOThrough feed double cut off saw with loader for linking with 4 sided moulders leads to a reduction in man power requirementsEasy loading using hopper ensures maximum throughput capacity reachedSystem will cut boards to desired length, and automatically feed the cut boards continuously through the moulder butt to buttSystem comes complete with automatic waste conveyor for easy removal of offcuts to disposal area.Also available in differ...