ID: 1830
Open
.jpg)
.jpg)
.jpg)
Description
PARTE: 2TA-WG-2630 - ASTILLADORA - 26 PULGADAS
Features:
- A specially designed, powerful crusher for different materials such as wood, plastic, rubber, corn cobs, etc.
- Excellent wearing ability and impact-resistant for time & labor saving.
- Large busting capacity and easy feeding system.
- The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usage.
- Cutter head angle cutting design allows aggressive cutting rates & high speed shredding of waste.
- Movable screen for changing the size of chips and easy to clean-up.
- Energy efficient & quiet running industrial motor.
|
SPECIFICATIONS |
WG-2630 |
WG-4150 |
|
Entrance Capacity (L x W) |
26" x 12" |
41" x 12" |
|
Rotary Cutter |
6 sets |
12 sets |
|
Stationary Cutter |
4 sets |
|
|
Busting Capacity at 1/2" Chips |
1300 ~ 2600 (LBS/ Hour) |
1300 ~ 4000 (LBS/ Hour) |
|
Finish Chip Size |
3/4" (or other size) |
|
|
Main Motor |
30 HP |
50 HP |
|
Machine Sizes (L x W x H) |
82" x 52" x 79" |
90" x 70" x 98" |
|
N.W. |
3800 LBS |
6600 LBS |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery1
PARTE: 2BE-BEL – COLECTORES DE POLVOS – MODULARES
PARTE: 2BE-BEL – COLECTORES DE POLVOS – MODULARESNuevos con garantía 5 HP - BEL50XL - 230/460V7.5 HP - BEL75XL - 230/460V10 HP - BEL100XL - 230/460V15 HP - BEL150XL - 230/460V20 HP - BEL200XL - 230V - 460V PODEROSAS, BAJO EN RUIDO, SISTEMAS PARA INTERIORES DE COLECCION DE ASERRIN
Ranging
from 5 HP to 20 HP, it offers high efficiency and a full range of features. Designed in compliance with NFPA.
Optimized for maxim...
AMXmachinery1
MOLDURADORA – 5 CABEZALES – OMIL PLM 5
PARTE:
12351 - MOLDURADORA – 5 CABEZALES – OMIL PLM 5
USADA BUENAS CONDICIONESANCHO MAXIMO 160 MMALTO MAXIMO 90 MMLARGO MINIMO 200 MMCABEZALES 5500 RPM6 MOTORES POTENCIA TOTAL
45.5 HP
HECHA EN BRASIL
AMXmachinery1
CANTEADORA AUTOMATICA
CANTEADORA AUTOMATICA PARTE: 2CK-MX350MRIs an entry-level edgebander with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, can output high-quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. A special feature of this machine is the dual purpose end trim system which can either...
AMXmachinery1
CANTEADORA - 12 PULGADAS
PARTE: 2CK-J127LHIs a truly industrial long bed jointer capable of producing perfectly jointed material used in the production of wood furniture, doors, face frames. and more. The heavy-duty cast iron infeed & outfeed table and back fence provide superior vibration damping which results in an optimum jointed finish. The spiral insert cutterhead with its two-sided solid carbide inserts provides optimum stock removal with a superior finish. The insert knife cutterhead in its spiral pattern r...