Identificador: 1935
Abierta
Descripción
PARTE: 2VE-VTH-35/8/2VU - ASTILLADORA PARA MADERA - HORIZONTAL - 40 HP
TRANSPORTADOR VTBRATORIO 16” LARGO
NUEVA CON GARANTIA
Application Description:
Type of material to be ground: Wood – Pine, kiln dried
Form of material to be ground: Rips from gang-rip, waste wood from cut-offs
Typical size of material to be ground: < 5” x 18” x 16’
Required volume of material to be ground: 1,000 lbs/hr
Desired screen or particle size: 3/4”
Use of ground product: Not Specified
SPECIFICATIONS
Machine Infeed Opening: 3.5” H x 14” W
Rotor Length: 14”
Rotor Diameter: 12”
Number Of Cutters: 18 (40 mm x 40 mm)
Rotor Speed: 390 rpm
Infeed Conveyor: 16’ Vibratory Conveyor
Drive Motor HP: 40
Voltage: 460V/3ph/60Hz
NOTE: A throughput rate in excess of 1,000 lbs/hr through a 3/4” screen is achievable dependent on the type of material, form of material, screen size and method of feeding.
Throughput estimates are based on maximum obtainable rates and may vary according to material types and screen sizes.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PLANCHA SUBLIMACION 15 X 15"
PARTE: 2EB-AG010 - PLANCHA SUBLIMACION 15 x 15"Description: This machine can transfer the photos or words printed by sublimation ink and menstruum ink on T-shirt cotton, hemp, chemical fiber, art article etc, also it can make other technical heat treatment.It has the competitive price and also popular used.Features: Digital controllerAutomatic alarmElectronic equipment control the temperature,high veracity(±2℃)The heated thread and heated board are together,safe,durable...
AMXmachinery
LIJADORA DE MOLDURAS
PARTE # 2TA-SD-602T - LIJADORA DE MOLDURAS – 2 ARRIBAPARTE # 2TA-SD-603TU - LIJADORA DE MOLDURAS – 2 ARRIBA – 1 LADOPARTE # 2TA-SD-603TU - LIJADORA DE MOLDURAS – 2 ARRIBA – 2 LADOSNueva con garantiaDesigned for high production moulding sanding of straight stick of solid wood, veneered panel and finish between coats with profile, angular, or straight edge.Workpiece is through feed with power spring-load pressure rolls at top, without sliding for irregual surface.The brush, flap whee...
AMXmachinery
EXTRACTOR DE TURBINA - 1 HP - S&P
PARTE: AMX-10135 - EXTRACTOR DE TURBINA - 1 HP - S&P
USADO - BUENAS CONDICIONES
MEDIDAS: ANCHO 20” X 12” FONDO X
18” ALTO
ENTRADA REDONDA 5”
SALIDA REDONDA 4-3/4”
1 HP, 220/440V, 3 FASES
6,500.00 MXN
AMXmachinery
PRENSA CALIENTE – 3 SECCIONES – 200 TON
PARTE: 3UD-HP48X200T-3 – PRENSA
CALIENTE – 3 SECCIONES – 200 TON – AMX MACHINERY
Nueva con garantía
Maximum
pressure 200T
Number
of working layers 3
Number
and specifications of plates 6-42 x 2500 x 1300mm
Spacing
of hot press plate 100mm
Oil
cylinder ɸ100 x 10pcs
Hydraulic
motor power 5.5kw
Heat
pump power 2.2kw
Heating
pipe power 60kw
Dimensions
3500 x 1700 x 2650mm
Net
weight 8200kg