Identificador: 1935
Abierta
ID de articulo : # 1909 se ha agregado a su lista de deseos.
Descripción
PARTE: 2VE-VTH-35/8/2VU - ASTILLADORA PARA MADERA - HORIZONTAL - 40 HP
TRANSPORTADOR VTBRATORIO 16” LARGO
NUEVA CON GARANTIA
Application Description:
Type of material to be ground: Wood – Pine, kiln dried
Form of material to be ground: Rips from gang-rip, waste wood from cut-offs
Typical size of material to be ground: < 5” x 18” x 16’
Required volume of material to be ground: 1,000 lbs/hr
Desired screen or particle size: 3/4”
Use of ground product: Not Specified
SPECIFICATIONS
Machine Infeed Opening: 3.5” H x 14” W
Rotor Length: 14”
Rotor Diameter: 12”
Number Of Cutters: 18 (40 mm x 40 mm)
Rotor Speed: 390 rpm
Infeed Conveyor: 16’ Vibratory Conveyor
Drive Motor HP: 40
Voltage: 460V/3ph/60Hz
NOTE: A throughput rate in excess of 1,000 lbs/hr through a 3/4” screen is achievable dependent on the type of material, form of material, screen size and method of feeding.
Throughput estimates are based on maximum obtainable rates and may vary according to material types and screen sizes.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
COLECTORES DE ASERRIN PARA EXTERIORES
PARTE: 2EX-DCY-1215 – COLECTOR PARA EXTERIORES – MOTOR 15 HP – 7600 CFMPARTE: 2EX-DCY-1220 – COLECTOR PARA EXTERIORES – MOTOR 20 HP – 8800 CFMPARTE: 2EX-DCY-1425 – COLECTOR PARA EXTERIORES – MOTOR 25 HP – 10500 CFMNuevos con garantiaCaracteristicas:Powered unit with rotary airlock and multiple stand configurations to accommodate a variety of height and dumpster dimensions.This series requires no bagging because all waste dumps from the rotary air lock, and there is no n...
AMXmachinery
SIERRA MULTIPLE - DE VAIVEN - NEVA
PARTE:
12411 - SIERRA MULTIPLE - DE VAIVEN - NEVA
USADA - BUENAS CONDICIONES
AMXmachinery
ENCHAPADORA DE CANTOS CEHISA EP7
PARTE # 10402 - ENCHAPADORA DE CANTOS CEHISA EP7Modelo: 2002Motores: 220V, 3 fasesMedidas totales de la maquina: alto 1.20 mts x largo 2.80 mts x fondo 0.80 mtsEn muy buenas condicionesTiene todos sus mantenimientosYa lista para envio en su tarimaEstacion pulidora externa incluida
AMXmachinery
GUILLOTINA CHAPA 2 NAVAJAS
PARTE # 3NN-CUTMATE3400D – GUILLOTINA PARA CHAPA – 2 NAVAJAS - 3400 MMPARTE # 3NN-CUTMATE2800D – GUILLOTINA PARA CHAPA – 2 NAVAJAS - 2800 MMSpecificationModelCutMate 3400DCutMate 2800DCutting Length3400 mm2800 mmDaylight Opening80 mm80 mmElectric Powerapprox. 11 kwapprox. 11 kwCutting Width30 ~ 470 mm30 ~ 470 mmDimensions of Guillotine (L x W x H)5100 x 1800 x 2000 mm4500 x 1800 x 2000 mmDimensions of Hydraulic Tank (L x W x H)1150 x 550 x 1100 mm1150 x 550 x 1100 mmNet Weight (with Hydr...