ID: 1423
Open
Description
PARTE: 1SIL-DC-EQ-BAND - Banderas De Señalización
Banderas de señalización de PVC en rollo con 30m
Las cintas con leyendas como peligro, precaución entre otras son de gran utilidad para demarcar zonas en donde lo necesites.
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 2PR-500 - ABANICO DE TECHO INDUSTRIAL - DIAMETRO 381 CM
PARTE: 2PR-500 - ABANICO DE TECHO INDUSTRIAL - DIAMETRO 381 CM
Nuevo con garantía~ Input: Single Phase 220V @ 10 Amps OR Three Phase 230V @ 5 Amps
~ Speed control via VFD which also converts incoming power to 3
phase for the motor
(This allows us to use 3
phase Inverters as well if needed)
~ 12.5’ Diameter @ 100 RPM
~ 80-120’ Diameter cooling coverage
~ The industries shortest ceiling drop @ 25” utilizes a
horizontally mounted motor to save precious ceiling he...
AMXmachinery
ESPIGADORA DOBLE DE CADENA - CAPACIDAD 59” - FRIULMAC
PARTE: 12415 – ESPIGADORA DOBLE DE CADENA - CAPACIDAD 59”
- FRIULMAC
USADA - BUENAS CONDICIONESModel
ContouramatWorkpiece
Length: 115 - 1500mm (4.52" - 59")Workpiece
Width: 30 - 250mm (1.2" - 10")Workpiece
Thickness: 12 - 50mm (.5" - 2")Left
& Right Top & Bottom Trip SawsTrim Saw
Motors are 4 HP Each (Two Per Side)Trim Saw
Blade Diameter: 125 - 180mmLeft
& Right Profiling/Cope StationsCope
Motors: 7.4 HP EachProfiling
Cutterhead Diameter: 160 - 220mmHopper
Feed
...
AMXmachinery
MOLDURADORA – 5 CABEZALES – 9” ANCHO – WEINIG
PARTE: 12252 – MOLDURADORA – 5 CABEZALES – 9”
ANCHO – WEINIG
USADA – BUENAS CONDICIONES
– LIMPIADA Y REVISADA
5-head machine
4-3/4" X 9-1/6" capacity
Spindle configuration: 7.5 HP bottom, 10 HP
shared between right and left spindle, 15 HP top, and 10 HP bottom
Spindle diameter: 1-1/2"
Variable speed feed 20 to 40 FPM
72" infeed straightening table
First feed wheel (before bottom spindle)
pneumatic up/down
Central adjustment of top spindle chipbreaker ...
AMXmachinery
ALIMENTADOR PARA SIERRA CINTA - 1/8 HP 220V, 1 FASE
PARTE: 2SG-AF06 - ALIMENTADOR PARA
SIERRA CINTA - 1/8 HP 220V, 1 FASE
Nuevo con garantía
Para sierras cintas hasta de 24”Ideal
for light to medium duty use on a bandsaw and is spring-loaded, ensuring smooth
and accurate cuts. A
much better alternative to using standard 3 and 4 wheel machines.Equipped
with two 8 x 1" Polyurethane Rollers and can be adjusted in and out
depending on the size of your bandsaw table. FeaturesVariable
Speed - 0-40Ft/min1/8
HP Motor 220V, 1 faseMax
...