Identificador: 1582
Abierta
Descripción
PARTE: 12335 - CEPILLO 2 CARAS - CAPACIDAD 30”
USADO - BUENAS CONDICIONES
460/60/3, 135 amps electrics
Standard Specifications:
- 32-3/8" wide
x (3/8” to 6") thickness work-piece capacity
- 13” minimum
length x 2” minimum width work-piece
- 50 HP, 230/460/3
top head motor
- 50 HP, 230/460/3
bottom head motor
- 6” diameter,
5,000 RPM solid steel cutterheads
- Helical
cutterheads with insert style knives
- 10 HP 15 HP
inverter-controlled feed motor, (30 to 80 ft/min.)
- “Carpet” style
feed system with 1,500 spring loaded spikes
- 2 HP 4-column
feed carpet/top-head elevation motor
- (3) bottom &
(3) top powered feed rollers & (4) bottom & (1) top idle feed rollers
- Digital thickness
setting controls with cutterhead motor amp meters
- 34” pass-line
height
- (1) automatic
& (1) manual oiler, (low oil shut-off)
- (4) 6” diameter
dust ports, (~6,000 CFM)
- 90 PSI pneumatic
requirement, (3/8'' diameter inlet)
- 75 dB sound rating
- 115” L x 88” W x
70” H approximate overall dimensions
- Weighs
approximately 15,500 lbs.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA TRONZADORA 18"
PARTE: 3YH-YFC-18 – SIERRA TRONZADORA – 7.5 HP – SIERRA 18” – AMX MACHINERYMAQUINA EN FOTO: IZQUIERDAOPCIONAL: DERECHASPECIFICATIONS● Cutting capacity (Thickness x Width)：2" x 12", 3" x 11", 4" x 10"● Cycle speed：45 cuts/min● Cycle operation：Pneumatic● Saw blade diameter (Option)：ø18"● Saw arbor diameter：ø1"/ 30mm● Saw blade speed ：3600 rpm● Dust exhaust diameter：ø4" x (1)● Saw arbor motor：7.5HP / 10HP● Table size：660X 690mm● Net weight：350 kg...
AMXmachinery
PRENSA PARA SILLAS
PARTE # 10450 - PRENSA PARA SILLASEn buenas condiciones de operacionPrensa especial para armar sillasVoltaje: 415V, 50hzCapacidad prensa ancho: 600 mm aproximadoCapacidad prensa alto: 1000 mm aproximadoDimensiones totales: 130 cm x 130 cm x 220 cm
AMXmachinery
CEPILLO 4 CARAS – 16” ANCHO - MIDA
PARTE:
12283 – CEPILLO 4 CARAS – 16” ANCHO - MIDA
USADO –
MUY BUENAS CONDICIONESYear 2002Motor Power 37,4 kWVoltage 400 V (three-phase)C.E. YesAbres 4Largueur min/max. Travail 420
mmHauteur min/max. Travail 11 -
300 mmLongueur table travail 1000 mmTotal Nº axis 4Bottom horizontal axis Yes 11
kWDrill right axis Yes 6,6 kWDrill left axis Yes 6,6 kWUpper horizontal axis Yes 13,2
kWVitesse d avance 3-30 m/minDiametre rouleaux avancement
90 mmDrag upper number 3Transmission Type Ca...
AMXmachinery
ASTILLADORA 7"
PARTE: 2WA-CR70 – ASTILLADORA – MOTOR GASOLINA 38 HP, CAPACIDAD 7” DIAMETRO7" x 12" Slab Style OpeningAuto Engage Fluid CouplerDual Active RollersIntellifeedKohler Gas EngineRotor DiscAngled RotorLedger AdjustmentRapid Recovery Auto ReverseEasy Start Tension ReliefSafety / Control Bar360° Swivel Exit ChuteEasily Accessible Rotor HoodRotor Lockout Safety LeverDouble Banded V-BeltsHighway TiresElectric BrakesTorflex Suspension AxlesSignal LightsLockable Fuel / Storage CompartmentEnclosed Fu...