Identificador: 2339
Abierta
.PNG)
.jpg)
Descripción
COLECTOR DE POLVOS - 3HP - 2CK-UFO102B
Is ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop.
- 3HP generating 1883 CFM
- Base is mounted on casters so it can be moved around the shop to where it is needed
- Durable cotton filter bags
- CSA / UL magnetic starter included
- 3HP Motor
- 1883 CFM
- 6” main inlet with removable outlet with (3) 4” ports
CFM | 1883 CFM |
Motor | 3 HP |
Main inlet diameter | 6″ |
Connector inlet diameter | (3) 4″ |
Bag Volume | 10.48 cubic feet |
Static pressure of water | 9.26 inch |
Top bags (2) | 18.9″ x 31 ½” |
Bottom bags (2) | 18.9″ x 31 ½” |
Electrics | 230/1/60 = 17 Full Load Amps |
Net weight | 169 lbs |
Shipping weight | 180 lbs |
Shipping dimensions | 48″ x 23″ x 23″ |
Noise Level | 80dB |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA CINTA - 20 PULGADAS
PARTE: 2CK-HB500RIncorporates a robust design with economical price point. With its industrial cast iron wheels and table assembly it can handle any job. With its powerful 3HP motor and capacity to run from a ¼” to 1 ¼” blade it can hand a wide range of cutting requirements. The upper and lower blade guides provide maximum stability no matter the blade you are cutting with. This bandsaw delivers high accuracy for maximum production along with a simple design that assures minimum ma...
AMXmachinery1
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA - 1 LADO
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA
- 1 LADO
NUEVO CON GARANTIAOffers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in front of the tenon heads and enables stock to be cut to the desired length. The two horizontal spiral insert knife tenoning heads are capable of producing a tenon up to 6” long. The heads are accurately adjusted using mechanical digital readouts. The spiral insert heads produce an extremely smooth finish result. The tw...
AMXmachinery1
FINGER JOINT AUTOMATICA
FINGER JOINT AUTOMATICA PARTE: 2CK-FL03Is a cutting-edge fully automatic finger jointing production line, designed to efficiently convert wood waste into valuable materials while maintaining an excellent performance-to-cost ratio. With its innovative technology, this system offers remarkable value in terms of both performance and price, the entire machining procedures from workpiece in-feed, left and right shaping to jointing is fast, smooth and accurate. The whole production line i...
AMXmachinery1
REBAJADORA DE CAJONES
PARTE: 2CK-JEN60Designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machined per hour.57mm (2 ¼”) wide cutter head...