Identificador: 1708
Abierta
Descripción
PARTE: 2CK-MX340M
Is an entry level edgebander with the perfect blend of quality and affordability. With fine attention to detail and quality componentry the MX340M can output high quality edges on cabinet parts and more. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.
- Compact design makes it the ideal edgebanding solution for small workshops
- Precise adjustments for optimum edge quality
- Chain feed system ensures consistent feeding of material for consistent results
- Available in 230V 1 or 3 phase
- PLC control system with LED display and keypad
- Workpiece is fed by chain
- Edge coil support plate: Ø 800 mm (31.5″), for PVC/ABS
- Automatic edge feeding with a thickness capacity of 0.4-3 mm; strip material up to 4mm can be hand-fed
- Coiled edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears.
- 2 kg (2.64 lb) Teflon-coated hot-melt glue pot
- Spring loaded pressure unit with (2) pressure rollers (1 chrome & 1 rubber)
- Heavy duty pressure beam with extendable work-piece support
- Heated infeed fence for pre-heating the panel for optimum glue penetration
- Mechanical digital readouts for convenient and quick adjustment to the working units & thickness
END TRIM
8800 RPM dual saw blade (80mm / 3.15″) end trimming unit
TOP & BOTTOM TRIM
10500 RPM top & bottom trimmers with insert knife cutters for radius trimming & bevel trimming
RADIUS SCRAPING
Radius scraper with 2mm radius knives can be easily excluded when not required
BUFFING
2800 RPM top & bottom buffing units to polish the machined edge
|
|
INCH |
METRIC |
|
Feeding speed |
23 FPM |
7 m/min |
|
Panel Thickness |
0.472” – 1.77” |
12 - 45 mm |
|
Edge thickness |
0.0158”– 0.118” |
0.4 – 3 mm |
|
Minimum panel size |
4 ¾” x 4 ¾” |
120 x 120 mm |
|
Working table size |
33.5” |
850 mm |
|
Dust collection outlet diameter |
2” x 4” |
2 x 100 mm |
|
Total connected power |
5 HP |
3.8 KW |
|
Air |
7.06 CFM / 85 – 100 PSI |
200 litres/min /6 – 7 kg/cm² |
|
Max. machine dimensions (LxWxH) |
115” x 47” x 48” |
2921 x 1194 x 1220 mm |
|
Machine weight |
968 lbs |
440 kgs |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ALIMENTADOR - VELOCIDAD VARIABLE - 4 RUEDAS - STAND INTELIGENTE
PARTE: 2CK-DS400Is safe on consistent feeding unit for shaper, table saws, and more. The rubber feed wheels grip the workpiece firmly and feed it at a constant speed to produce flawlessly finished pieces. The brushless servo motor with electronic variable speed adjustment allows the operator full control for setting the optimum feed speed according to the specific job, Includes the SS03 Heavy Duty Smart Stand which features an extra-long support column and extension arm which allows for use ...
AMXmachinery1
CEPILLO 1 CARA - 26 PULGADAS
PARTE: 2CK-CM626Is a production planer with high horsepower and feed rates. It is equipped with our spiral insert knife cutterhead with two sided replaceable knives which produce a smooth planed finish with maximum cutting depth. With upper and lower driven feed rollers can plane even the most difficult to feed material. The powerful 20HP motor can ensure optimum stock removal even on full width boards. With infinitely variable feeds the operator has full control to ensure the optimum fe...
AMXmachinery1
DOBLADORA HIDRAULICA ROTATORIA
DOBLADORA HIDRAULICA ROTATORIA PARTE: 2GM-DB-60ATaiwan MachineISO 9001 certifiedNC-control for bending angle adjustmentLED degree indicator with automatic stop programming, to get as true reading of bending degree.Up to 50 jobs memory; each job program contains 9 stepsCounter roller holder comes standard with quick adjustmentThis easy to use hydraulic tube draw bender has an incredible capacity of 2” tube with .12” wall thickness and 1-1/2” schedule# 4...
AMXmachinery1
PARTE: 4NE-FUERTE1325 - CENTRO DE MAQUINADO CNC - 10 HP - FUERTE 1325
PARTE: 4NE-FUERTE1325 - CENTRO DE
MAQUINADO CNC - 10 HP - FUERTE 1325Control Unit HSC-RTEX (TÜRKİYE)• Spindle: HERTZ 8.5 KW 24000 rpm ISO30 (TURKEY)• Vacuum Pump: BLOWER VAKUM POMPASI• Working Capacity: 2100mm*2800mm (2100mm*3660mm Option)• Remote Control: YES• Automatic Self Lubrication System: YES ( ILC - Italian )• 10 Tool capacity tool magazine back side of chassis• 10 Toolholder• Vacuum Zone: 6 zone for 2128 / 8 zone for 2136• Automatic Unloading and Cleaning System: Op...