Identificador: 196
Abierta
Descripción
PARTE: 2TA-EB-3ESB - ENCHAPADORA DE CANTOS
- Automatic feed station for: Gluing, Front & Rear End Trimming, Top & Bottom Edge Trimming, Top & Bottom Edge Polishing,
- Total enclosure covers with dust hood connector.
- Heavy and rigid construction to ensure necessary accuracy and stability.
- To guarantee straight-line feed of the panel, a double row of rubber rollers is off centered onto top pressure beam and bottom feed track with rubber calibrated pads is running on cylindrical guide.
- The top pressure beam is supported with two reinforced columns are equipped with visible linkages for thickness adjustment.
- The feed of edging material, by strip or coil is automatic and synchronously with panel feed.
- Extension rollers support for wider panels.
- The electric and pneumatic system is incorporated in the built-in control cabinets.
- Side Pressure Unit: Standard with one row of vertical rollers for straight edges.
- Gluing Unit: With the use of melt glue applied on straight Panel for edges banding.
- Double End Trimming Unit: Application for fine trimming front & rear edge by HIGH FREQUENCY saw motor
- Edge Trimming Unit: This top and bottom edge trimming unit is complete by cutter heads with two independent HIGH FREQUENCYmotors
- Polishing Unit: Apply the finest finish surfacing process on top and bottom edge.
| SPECIFICATIONS | EB-3ESB |
| Edging PVC Band Thickness | 0.0015” ~ 0.118” (0.4 ~ 3 mm) |
| Edging Band Width | 0.55” ~ 2” |
| Work Piece Thickness | 0.47” ~1.77” |
| Work Piece Minimum Length | 11” |
| Work Piece Minimum Width | 3.5” |
| Edge Band Feed Motor | 25 W |
| Gluing Motor | 60 W |
| End Trimming Saw Speed | 12000 RPM |
| End Trimming Motor | ½ HP |
| Edge Trimming Cutter Speed | 12000 RPM |
| Edge Trimming Motor | ½ HP x 2 |
| Polish Wheel Speed | 1400 RPM |
| Polish Motor | 1/8 HP X 2 |
| Feed Speed | 0 ~ 23 FPM |
| Feed Motor | ½ HP |
| Heating Element Power | 1250 W |
| Total Power | 4 HP (3 KW) |
| Power | 220V 3PH |
| Air Pressure | 90 PSI |
| Machine Size | 87" x 28" x 48" |
| N.W. | 950 LBS |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PLUMA ELECTRICA CON AGARRE DE VACIO Y BRAZO ROTATORIO
PARTE: 2EV-9265 - PLUMA ELECTRICA CON AGARRE DE VACIO Y BRAZO ROTATORIONuevo congarantía110 Volt, 1 Phase 60 hz5” casters on the front and 5” fixed wheels in back400 lb lift capacity8” suction cups on a mobile sledOn-board suction pump and accumulator tankAbility to flip panels over 180 degrees.Pivoting option below allows the panel to pivot horizontally on the arm for placement onto a lineOptions:- Pivoting 4 Cup Vacuum Hoist with Rotation Arm and 6' Reach (option 9245)
AMXmachinery
PARTE: 12269 – MONTACARGAS – 5,000 A 6,000 LBS - CATERPILLAR
PARTE: 12269 – MONTACARGAS – 5,000
A 6,000 LBS - CATERPILLAR
USADO
- BUENAS CONDICIONES
RODADA 10 ATRÁS
RODADA 12 ENFRENTE PARA TERRACERIA
MOVIMIENTO LATERAL DE CARGA
TORRE LEVANTE 3 SECCIONES
GAS LP
AMXmachinery
BRIQUETEADORA PARA METAL - HORIZONTAL - HYDRAULICA - 40 TONS
PARTE: 12376 - BRIQUETEADORA PARA
METAL - HORIZONTAL - HYDRAULICA - 40 TONS
USADA - BUENAS CONDICIONES
Specifications:
CAPACITY
.............................. 196 TONS
BRIQUETTE
SIZE ........................ 3.5" X 3.5"
HOPPER
FEED ........................... 6' X 6' (EST)
MOTOR
DRIVE ........................... 40 HP
HYDRAULIC POWER UNIT .................. YES
PRODUCTION
RATES:
CAST
IRON ............................. UP TO 2,000 LBS/HR
ALUMINUM
.......
AMXmachinery
BRIQUETEADORAS DE MADERA ASERRIN
PARTE # 4MU-MPP60 – BRIQUETEADORA - MOTOR 5.5 KW (7.5 HP) – 30-60 KG/HR PARTE # 4MU-MPP80 – BRIQUETEADORA - MOTOR 5.5 KW (7.5 HP) – 35-80 KG/HRFlete incluido a las principales ciudades de MéxicoNueva con garantíaTypeDesempenoKg/hrMotorKWMotorHP4MU-MPP6030-605.57.54MU-MPP8035-805.57.54MU-MPP11050-1105.57.54MU-MPP180100-1809.2124MU-MPP280120-2809.212Performance: 30 - 550 kg/hWaste with a maximum moisture content of 18 % from wood, straw, miscanthus (elephant grass), paper, cardboard, co...