ID: 198
Open
Description
PARTE # 2TA-EB-7B - ENCHAPADORA DE CANTOS RECTOS
Automatic feed station for: Pre-milling, Gluing, Pneumatic Guillotine, Double End trimming, Top & Bottom Rough Edge Trimming, Corner Rounding & Fine Top & Bottom Fine Edge trimming, Edge Scraping, Grooving, Edge Polishing
- The feed of edging material, by ** strip ** or coil is automatic and synchronously with panel feed.
- Total enclosure covers with dust hood connector.
- Heavy and rigid construction to ensure necessary accuracy and stability.
- To guarantee straight-line feed of the panel, a double row of rubber toothed rollers is off centered onto top pressure beam and bottom feed track with rubber calibrated pads is running on cylindrical guide.
- The top pressure beam is supported with two reinforced columns are equipped with visible linkages for thickness adjustment.
- Extension rollers support for wider panels.
- The electric and pneumatic system is incorporated in the built-in control cabinets.
- Side Pressure Unit: Standard with one row of vertical rollers for straight edges.
- Pre-Milling Unit: Two pre-milling heads running different direction to clean the surface without breaking the edge.
- Gluing Unit: With the use of HOT melt glue applied on straight Panel for edges banding.
- End Cutting Unit: Pneumatic guillotine application for cutting end of band material
- Double End Trimming Unit: Application for fine trimming front & rear edge by saw blade with two independent motors
- Edge Rough Trimming Unit: This top and bottom edge heavy trimming unit is complete by cutter head with two independent motors
- Corner Rounding and Edge Fine Trimming Unit: This top and bottom edge fine trimming unit is complete by cutter head with two independent motors to rounding the corner and edge automatically
- Scrapping Unit: Apply for scrapping top and bottom corners of PVC or ABS,
- Grooving Unit: Apply the groove, notch to the material surface.
- Polishing Unit: Apply the finest finish surfacing process on top and bottom edge.
| SPECIFICATIONS | EB-7B |
| PVC Film Band Thickness | 0.4 ~ 3 MM |
| Wood Strip Band Thickness | 8 MM |
| Max. Band Width Over Work Piece Both Side | 2 MM |
| Work Piece Thickness | 10 ~ 50 MM |
| Work Piece Min. Length (When use Pre-milling) | 6.3" |
| Work Piece Min. Length (When use Pre-milling) | 15" |
| Work Piece Min. Width | 3.5" |
| Edge Band Feed Motor | 0.025 KW |
| Pre-milling Motor | 2 KW x 2 |
| Gluing Motor | 0.75 KW |
| End Trimming Speed | 12000 RPM |
| End Trimming Motor | 0.37 KW x 2 |
| Rough Edge Trimming Speed | 12000 RPM |
| Rough Edge Trimming Motor | 0.75 KW x 2 |
| Corner Rounding and Fine Edge Trimming Speed | 12000 RPM |
| Corner Rounding Fine Edge Trimming Motor | 0.37 KW x 2 |
| Scraping Unit | Top & Bottom |
| Polish Wheel Speed | 1400 RPM |
| Polish Motor | 0.18 KW x 2 |
| Feed Speed | 1 ~ 49 FPM |
| Feed Motor | 1.5 KW |
| Heating Glue Tank Power | 2.3 KW |
| Heating Element Power | 0.12 KW |
| Total Power | 12.31 KW |
| Machine Size (L x W x H) | 222" x 49" x 61" |
| Net Weight | 5600 LBS |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery
LIJADORA DE DISCOS Y CEPILLOS - SLIPCON
PARTE # 11780 - LIJADORA DE DISCOS Y CEPILLOS - SLIPCONEN MUY BUENAS CONDICIONESMODELO: DBB-1350Specifications· Working width: 1350mm· Maximum thickness of work-piece: 100mm· Minimum thickness of work-piece: 1mm· Motor disc-station: 1.5 kW with 50-300rpm· Oscillation: 0.37 kW, 10-40rpm, 100mm· Motor (each sanding roller): 2.2 kW, 14-300rpm (400mm)· Diameter sanding roller: 300/4...
AMXmachinery
PARTE: AMX SIERRA RADIAL - MOTOR 5 HP - 220V, 3 FASES - DEWALT 3526
PARTE: AMX-10168 - SIERRA RADIAL - MOTOR
5 HP - 220V, 3 FASES - DEWALT 3526 MAQUINA PARA USO RUDO INDUSTRIALUSADA - MUY BUENAS CONDICIONESCAMBIO COMPLETO DE BALEROS - 2
BALEROS MOTOR NUEVOS, 8 BALEROS GUIA NUEVOSGUIA EN PERFECTAS CONDICIONES SIN
DESGASTEMESA DE TRIPLAY 3/4” ESPESOR NUEVA
CON SU TOPE DE TRIPLAY NUEVODISCO CORTADOR 12”, 80 DIENTES, 1”
CENTRO NUEVOLE CABE DISCO CORTADOR DESDE 10”
HASTA 16” DIAMETROARRANCADOR NUEVOTODO EL CABLEADO EXTERIOR USO RUDO
NUEVODISCO SE MUE...
AMXmachinery
ROSCADORA DE BASTONES
PARTE # 1N-BTC-020 - ROSCADORA DE BASTONES CON MOTORES INTEGRADOSIncluye su carro con guías para copiador.Tiene motor integrado de 1/2 HP, 110/220Volts, 1 fase.Produce aproximadamente 15 piezas/min.Medidas maquina: 60 cm largo x 40 cm ancho x 120 cm altoPeso: 60 kgVideo de la maquina trabajando: VIDEO 1
AMXmachinery
PARTE: 2TA-CM-200LG - PERSIANERA PARA HACER SHUTTERS
PARTE: 2TA-CM-200LG - PERSIANERA PARA HACER SHUTTERSFeatures:- A faster round louver groove mortise machine provides variable oscillating speed.- Distance between the slot is controlled by the template.- Two working tables built in both side of the machine to double the production for high efficiency mortising operation.- Automatic pneumatic hold down clamps- Fully automatic mortise produce cycles.- Pneumatic pistons for drilling depth speed control, enable for best results.- Depth of mortising ...