Identificador: 463
Abierta
Descripción
PARTE # SIL-DC-GC1.5 - GARRUCHA DE CADENA - 1.5 TON
CAPACIDAD 1.5 TONELADA
CADENA DE 3 METROS
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA CINTA – AUTOMATICA – CAPACIDAD 10”
PARTE: HA250W – SIERRA CINTA –
AUTOMATICA – CAPACIDAD 10” - AMADA
NUEVA CON GARANTIA
Machine
Specifications
Cutting
Capacity
Round
(Diameter) 1.18"-10"
Rectangle
(W x H) 11.8" x 10"
Work
Load Capacity 3,307 lbs.
Material
Index Stroke 15.75" (Maximum 9 Times Index)
Index
Length 0.394" x 141.7"
Saw
Blade Dimensions (L x T x W) 11'6" x 0.042" x 1-1/4"
Blade
Speed 89-295 ft./min, 60 Hz, Stepless
Saw
Blade Motor 5 HP
Hydraulic
Pump Motor 1 HP
...
AMXmachinery
MEDIDOR DE HUMEDAD PARA MADERA – SIN PINS - LIGNOMAT – LIGNO-SCANNER D
PARTE: 2LI-D - MEDIDOR DE HUMEDAD PARA MADERA – SIN PINS - LIGNOMAT – LIGNO-SCANNER DNuevo con garantíaMeasuringRange5-60% dependent upon species setting*Display0.1% resolution for the entire range.SpeciesCorrections71 wood group settings, or simply use specific gravity of the wood, between 0.3 and 1.0 (setting 30-100)GypsumScaleN/AReferenceScale0-99 for non-wood building materialsCalibrationStable calibration not affected by ambient temperature. Calibration is internally checked and auto...
AMXmachinery
PARTE: 4BA-DPM-ED-2141 – SIERRA ESCUADRADORA VERTICAL – CAP. 2100 MM X 4100 MM X 60 MM
PARTE:
4BA-DPM-ED-2141 – SIERRA ESCUADRADORA VERTICAL – CAP. 2100 MM X 4100 MM X 60 MM
Nueva con garantía
Demo
model with about 30 hours on it
Specifications
-
Comes with digital readouts on the vertical and horizontal axis, readout in
decimal inches or mm
-
Processing sheets both horizontally and vertically
-
Cutting height is 2100mm
-
Cutting length is 4100mm (161") Actual overall length of machine is 16’.4”
-
Weight 2400 lbs
-
Thickness of cut i...
AMXmachinery
PEGADORA DE SABANAS - FISHER RÜCKLE
PARTE
# 12161 – PEGADORA DE SABANAS - FISHER RÜCKLE
USADA – MUY BUENAS CONDICIONES
Year of manufacture 1993
Opening width mm 2.850
Veneer thickness min mm 0,4
Veneer thickness max mm 2
Strip width min mm 70
Strip width max mm 430
Width of lifting table mm 430
Feedrate max m/min 24
Gluing aggregate Yes
Cross splicing machine Yes
Lift table Yes
Trimming unit Yes
Joint Only edge gluing
Operating status dismantled/ stored