ID: 1336
Open
.png)
.jpeg)
LIJADORA DE BANDA - MESA MOVIBLE – 2 BANDAS – MOTOR 5 HP - MESA 30”X 96” - USO RUDO
AMXmachinery
Description
PARTE: 2DO-PMC-HD2 – LIJADORA DE BANDA - MESA MOVIBLE – 2 BANDAS – MOTOR 5 HP - MESA 30”X 96”
USO RUDO
Nueva con garantía
Heavy duty welded structure. They feature dust hoods on both sides, a table with steel rollers and virtually wear free balanced and quiet running aluminum pulleys. All models are equipped with a magnetic starter (overload protection) and belt guards.
Maximum Part Length:
Pressure Pad Traveling Bar: 96"
Pressure Pad Traveling Bar Contact Wheel Assembly: 80"
Table size: 30" wide X 96" long
Steel table is covered with Russian Cherry wood plywood surface
Motorized vertical table with 28" vertical adjustment
Table weight capacity: 1000 lb
Two Abrasive Belt: 6" X 264", 4750 F.P.M.
Pulleys: 10" dia. X 6.25" face
Pressure Pad Traveling Bar
Hand Held Pressure Device
Magnetic starter with overload protection
Belt guards
Pneumatic tensioner
Sanding belt breaking detector
Dust collector outlet: 6" diameter @ 1200 cfm
Compressed air requirement: 90 psi
5 HP T.E.F.C. motor, 1750 rpm
Voltage: 220 or 440 / 3 / 60, 17 amps
OPTIONS
Single Phase 5 HP motor, 220 volts
Enlarge the table to 48"
Vulcanized Rubber Grooved Contact Wheel Assembly
- (for hairlining & fine graining)
Contact Wheel Assembly with Corrugated Stacked Disks
- (for weld seam removal & rough graining)
Variable speed for a 5 HP Motor:
- Allow belt speed between 3300 to 6300 ft./min.
Six (6) Vacuum cups with individual activation switch, to hold parts
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 2GM-HS-0412-MD-3 - GUILLOTINA HIDRAULICA - DELUXE
PARTE: 2GM-HS-0412-MD-3 - GUILLOTINA HIDRAULICA - DELUXEModelos Disponibles:HS-0412MD, 4’x12Ga. 3 HP, 220//440V, 3 PH, 24” manual back gaugeHS-0410MD, 4’x10Ga. 5 HP, 220440V, 3 PH, 24” manual back gaugeHS-0610MD, 6’x10Ga. 5 HP, 220/440V, 3 PH, 24” manual back gaugeHS-0810MD, 8’x10Ga. 7.5 HP, 220/440V, 3 PH, 24” manual back gaugeHS-1010MD, 10’x10Ga. 7.5 HP, 220/440V, 3 PH, 24” manual back gaugeHS-1014MD, 10'x14Ga. 5 HP, 220V, 3 PH, 24" manual back gauge
AMXmachinery
PARTE: 1AM-1200 - REASERRADORA 1 CINTA – CAPACIDAD 10” ANCHO X 5” ALTO – AMX MACHINERY
PARTE:
1AM-1200 - REASERRADORA 1 CINTA – CAPACIDAD 10” ANCHO X 5” ALTO – AMX MACHINERYNueva con garantíaCapacidad de corte máximo: 10” ancho x 5” altoSierra cinta: 131” largo x 1-1/4” ancho - paso 7/8” para
tabletear madera pinoBanda: 160” x 10” anchoMotor principal: 10 HP, 220/440V, 3 fases,
conectado a 220VMotor avance: 2 HP, 220/440V, 3 fases, conectado a 220VMedidas totales: 68” ancho x 80” fondo x 63” alto
Medidas totales de e...
AMXmachinery
DESCORTEZADORA DE TRONCOS
PARTE # OM-DR2700 - DESCORTEZADORA DE TRONCOSEQUIPO DE CURPO ROBUSTO PARA TRABAJO INDUSTRIA PESADOEL REMOVER LA CORTEZA EVITA EL DESGASTE PREMATURO DE SIERRAS CINTASLONGITUD MAXIMO TRONCO: 2700 MMDIAMETRO MAXIMO DEL TRONCO 350 MMMOTOR 35 HPDIMENSIONES EQUIPO 4300 X 1600 X 1200 MM
AMXmachinery
SIERRA VERTICAL 64 X 120
PARTE # 2SS-H5 – SIERRA VERTICAL – MOTOR 3 ¼ - CAP. 64” ALTO X 120” LARGO – 1 ¾ “ espesorNUEVA CON GARANTIACORTE VERTICAL: 64"CORTE HORIZONTAL: 120" SIN LIMITEESPESOR CORTE: 1-3/4"DIAMETRO SIERRA: 8"MOTOR: 15 AMP, 120V, 220VLARGO DEL MARCO: 120"DATOS DE ENVIOPESO: 298 LBSDIMENSIONES: 120 X 11 X 83 PULGADAS