Identificador: 1751
Abierta
Descripción
PARTE: 2CK-E6
Can effectively sand the edges of solid wood or MDF cabinet doors, furniture parts, and stair treads to prepare it for finishing and between coats. The adjustable RPM provides you with full control of the sanding speed for optimum finishing results. The head oscillates up and down and is manually adjustable to utilize the full width of the abrasive. The sanding strips can be exchanged quickly to change between various grits. The back fence can be utilized for straight sanding and can be easily removed for sanding curved components.
- Ideal for sanding the edges of cabinet doors, stair treads, or furniture components.
- Brush abrasive can sand into profiles or break the edges
- Oscillation ensures optimum usage of the abrasive and ensures a quality sanding result
KEY ADVANTAGES
- Adjustable spindle height for maximum usage of the abrasive.
- Adjustable & removable back fence for linear or curved sanding
- Variable speed sanding head
- Magnetic starter with emergency stop button
- Built in dust hood
- Comes with 1 (one) set of 150 grit abrasives
|
DESCRIPTION |
INCH |
METRIC |
|
Sanding head length |
6” |
152mm |
|
Motor power |
½ HP |
|
|
Oscillating stroke |
0.82” |
20mm |
|
Table dimensions |
31.5” x 22” |
800 x 540mm |
|
Table height from floor |
33” |
838mm |
|
Dust port size |
3.5” |
89mm |
|
Machine dimensions |
44” x 34” x 42” |
1118 x 864 x 1067mm |
|
Shipping dimensions |
37” x 30” x 52” |
930 x 750 x 1315mm |
|
Machine weight |
220 lbs |
100 kgs |
|
Shipping weight |
330 lbs |
150 kgs |
|
Electrical requirement |
2.4 amps, 230/3/60 |
|
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
PARTE: 4NE-VALIENTE - CENTRO DE MAQUINADO CNC - VALIENTE
PARTE: 4NE-VALIENTE - CENTRO DE MAQUINADO CNC - VALIENTEControl Unit TPA (İtalian)• Spindle: HITECO HSK F63 11KW ATC• Vacuum Pump: BECKER 250M3• Working Capacity: 2100mm*2800mm (2100mm*3660mm Option)• Remote Control: YES• Automatic Self Lubrication System: YES ( ILC - Italian )• Under Bridge with 14 tool capacity magazine• 14 Pieces Toolholder• Vacuum Zone: 6 zone for 2128 / 8 zone for 2136• Boring Unit FAM 9 Vertical ( Italian ) Optional• Automatic Unloading and Cleaning Sy...
AMXmachinery1
ASTILLADORA - VERTICAL - 47 X 51 PULGADAS
PARTE: 2TA-WG-4751V - ASTILLADORA - VERTICAL - 47 X 51 PULGADASFeatures:A specially designed with push ram, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting design allows ag...
AMXmachinery1
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA - 1 LADO
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA
- 1 LADO
NUEVO CON GARANTIAOffers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in front of the tenon heads and enables stock to be cut to the desired length. The two horizontal spiral insert knife tenoning heads are capable of producing a tenon up to 6” long. The heads are accurately adjusted using mechanical digital readouts. The spiral insert heads produce an extremely smooth finish result. The tw...
AMXmachinery1
DOBLADORA DE METAL 4' X 12GA
DOBLADORA DE METAL 4' X 12GA PARTE: 2GM-0412EThis machine has a 2HP Motor, rated at 220V/440V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is powe...