Identificador: 1751
Abierta
ID de articulo : # 1751 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-E6
Can effectively sand the edges of solid wood or MDF cabinet doors, furniture parts, and stair treads to prepare it for finishing and between coats. The adjustable RPM provides you with full control of the sanding speed for optimum finishing results. The head oscillates up and down and is manually adjustable to utilize the full width of the abrasive. The sanding strips can be exchanged quickly to change between various grits. The back fence can be utilized for straight sanding and can be easily removed for sanding curved components.
- Ideal for sanding the edges of cabinet doors, stair treads, or furniture components.
- Brush abrasive can sand into profiles or break the edges
- Oscillation ensures optimum usage of the abrasive and ensures a quality sanding result
KEY ADVANTAGES
- Adjustable spindle height for maximum usage of the abrasive.
- Adjustable & removable back fence for linear or curved sanding
- Variable speed sanding head
- Magnetic starter with emergency stop button
- Built in dust hood
- Comes with 1 (one) set of 150 grit abrasives
|
DESCRIPTION |
INCH |
METRIC |
|
Sanding head length |
6” |
152mm |
|
Motor power |
½ HP |
|
|
Oscillating stroke |
0.82” |
20mm |
|
Table dimensions |
31.5” x 22” |
800 x 540mm |
|
Table height from floor |
33” |
838mm |
|
Dust port size |
3.5” |
89mm |
|
Machine dimensions |
44” x 34” x 42” |
1118 x 864 x 1067mm |
|
Shipping dimensions |
37” x 30” x 52” |
930 x 750 x 1315mm |
|
Machine weight |
220 lbs |
100 kgs |
|
Shipping weight |
330 lbs |
150 kgs |
|
Electrical requirement |
2.4 amps, 230/3/60 |
|
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
CANTEADORA AUTOMATICA
CANTEADORA AUTOMATICA PARTE: 2CK-MX350MRIs an entry-level edgebander with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, can output high-quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. A special feature of this machine is the dual purpose end trim system which can either...
-500x500.jpg)
AMXmachinery1
PARTE: 3AM-G-40/70S - SIERRA CINTA PARA METAL - DOBLE COLUMNA
PARTE: 3AM-G-40/70S - SIERRA CINTA PARA METAL - DOBLE COLUMNASaw Band Tensioning Method: ManualCore Components: Gearbox, Gear, Bearing, Engine, MotorApplicable Industry: Machinery Repair Shops, Manufacturing Plant, Farms, Construction Works, Energy &Amp; Mining, Food &Amp; Beverage Shops, OtherCore Selling Point: High-AccuracyBlade Tension: ManualBlade Speed(m/min): 27.45.80Vice Clamping: Hydraulic with ManualCutting Feed: Hydraulic steplessMax. Cutting Capacity(mm): Round:300mm, sqaur...
AMXmachinery1
ASTILLADORA - 15 PULGADAS
PARTE: 2TA-WG-1510 - ASTILLADORA - 15 PULGADASFeatures:A specially designed, powerful crusher for different materials such as wood, plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usage.Cutter head angle cutting design allows aggressive cutting rates & high speed shredding of ...
AMXmachinery1
EXTRACTOR -VENTILADOR INDUSTRIAL TIPO TAMBOR
PARTE: 1AM - EXTRACTOR -VENTILADOR INDUSTRIAL TIPO TAMBORDOS TAMAÑOS:VP-30: Aspa de 30″ de diámetroVP-42: Aspa de 42″ de diámetroCaracterísticas principales:*2 velocidades*Potente flujo de aire*30″ y 42″ de diámetro de aspa*Enchufe con borne de protección a tierra*127 volts*Llantas de plástico*Contiene 2 agarraderas, una en cada extremidad, para fácil movilidadUsos:*Ideales para usarse en talleres, bodegas y espacios exteriores.
Modelo
Potencia
WATTS
...