Identificador: 898
Abierta
Descripción
PARTE # 10070 - LIJADORA PARA CURVOS Y RECTOS
MARCA: BRUSA
MODELO: LT-80
PARA PULIR
- PALO DE ESCOBA
- REDONDOS
- MANGO DE HERRAMIENTA
- MOTOR ALIMENTADOR, 0.25 KW, 220 VOLTS, 60 Hz
- MOTOR PRINCIPAL LIJA, 5 HP, 220/440 VOLTS, 60 Hz, 1450 RPM
- MOTOR OSCILADOR, GIRA PARA REDONDEAR, 5 HP, 220/440 VOLTS, 60 Hz, 1400 RPM
- AJUSTE MANUAL, DIAMETRO ANCHO DE PIEZA PARA CADA LIJA 0 - 80 mm
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CIZALLA RECTA
PARTE # MK-JS1300 – CIZALLA RECTANivel de bajo ruido (sólo 80dB) para una operación silenciosa.Cabeza de corte girable a 360 grados para incrementar la maniobrabilidad.Diseño en línea que proporciona poder eficaz a las cuchillas.Carcaza de aluminio durable.ESPECIFICACIONES TECNICASPotencia: 570WCapacidad:Acero sobre 400 N/mm2: 1,3mmAcero sobre 600 N/nm2: 1,0mmAcero sobre 800 N/nm2: 0,5mmAluminio sobre 200 N/mm2: 2,5mmCarreras por minuto: 0-2.500Longitud total: 302mm (11-7/8")Peso neto: 1,8...
AMXmachinery
PROFILE KNIFE GRINDER
PART: 2TA-TG-9330-E - PROFILE KNIFE GRINDER
NEW WITH WARRANTYFEATURES:
Economical model for small shop.
Work table back to front, left to right is moved on linear
bearing cross roller rail sets, accuracy and durability.
Grinding wheel head is micro adjustable and accurate. 2 HP
variable speed control motor for powerful grinding.
Easy setup template holder for accurate copy tracer.
Knife-edge angle is adjusted by dovetails are grooved;
grinding center is never c...
AMXmachinery
CNC TALADRO, ENGOMA, INSERTA – WEEKE
PARTE: 12381 - CNC TALADRO, ENGOMA,
INSERTA – WEEKE
USADA – MUY BUENAS CONDICIONESYear
2013Model
Optimat ABD-050Year
2013460
volt three phase, 60 hz, 10 amps(1)
horizontal CNC controlled X-axis drilling head0.55
kw drill head drive motorSpindle
speed 7500 rpmMax
tool length 70 mm (2.75")(1)
glue injector with dowel insertion headTop
mounted vibrating dowel hopper feederPneumatic
actuation of drill head stroke and dowel insertion head(2)
independent table work zones (can be us...
AMXmachinery
PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR
PARTE # 11913 - PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR8.5 ft. wide with approximately 6 clamps per sectionClamps are standard 2-1/2” high jaws by 32” openingIncludes air tightener and panel flattenerMachine was new in 1983Good conditions