Identificador: 253
Abierta
Descripción
PARTE # 2TA-SM-155A - MOLDURADORA - 6" ANCHO, 5 CABEZALES
PARTE # 2TA-SM-156A - MOLDURADORA - 6" ANCHO, 6 CABEZALES
PARTE # 2TA-SM-205A - MOLDURADORA - 8" ANCHO, 5 CABEZALES
Nueva con garantia
Features:
- Hard chrome plated table for maximum wear resistance.
- Fully enclosed safety guard reduces noise and completely prevents chips splashing.
- Anti-impact plate for over-width and over-thickness protection.
- Oversized top and bottom rollers run synchronized, ensuring smooth feeding.
- FRP plastic steel safety guard features maximum durability and impact resistance.
- The three independent sections, pneumatic pressure for the infeed rollers, in-process rollers and outfeed rollers can be set with individual pressure allowing for consistent feeding results and outstanding effect.
- The smooth initial feeding of the stock is achieved by the independently powered infeed rollers.
- Exclusively designed template inserted pressure plate suits various stock thickness and profile variations.
- Special pressure plate adapted with table feeding roller design, provides smooth and precise cutting of dry and wet wood, reducing the possibility of material jams.
- The machine base is one piece coated from high quality cast iron (FC-25) for maximum stability of structure.
- Base is machined by CNC machine equipment to ensure the utmost working accuracy.
- The first bottom horizontal spindle can fit with a trimming cutter for trimming a groove at the workpiece side to achieve perfect straightness.
- The specially designed short stock feeding mechanism combined with auxiliary pressure wheels permits the machine to perform machining on extra short stocks.
- All spindles are precision constructed and especially heat treated to provide maximum cutting stability and permanent accuracy.
- Each spindle is provided with a mechanical digital read out, that gives accurate adjustment.
- Every cutter spindle can be adjusted "up and down" and "in and out" for quick setup.
- Industrial full power motor for maximum cutting capacity.
- Precision sealed long-life high speed ball bearing.
SPECIFICATIONS | SM-155A | SM-156A | SM-205A |
Max. (Min.) Working Width | 6" (3/4") | 6" (3/4") | 8" (3/4") |
Max. (Min.) Working Thickness | 4-3/4" (5/16") | 4-3/4" (5/16") | 4-3/4" (5/16") |
Min. Working Length | 9½" | 9½" | 9½" |
1st Spindle Horsepower | 7½ HP | 7½ HP | 7½ HP |
2nd, 3rd Spindle Horsepower | 5½, 5½HP | 5½, 5½HP | 7½,7½ HP |
4th, 5th, 6th Spindle Horsepower | 10, 7½, ~ HP | 10, 7½, 7½ HP | 15, 10, ~ HP |
Feed Motor | 3 HP | 4 HP | 5½ HP |
Elevation | 1/2 HP | 1 HP | 1 HP |
Spindle Diameter | 40 MM | 40 MM | 40 MM |
Cutter Speeds (RPM) | 6500 | 6500 | 6500 |
Variable Feed Speeds (FPM) | 16 ~ 66 | 17 ~ 66 | 16 ~ 82 |
Cutterhead Diameter |
|
|
|
1st Bottom Head | 5" | 5" | 5" |
2nd ,3rd Vertical Head | 5" ~ 6-1/4" | 5" ~ 6-1/4" | 5" ~ 6-1/4" |
4th ~ 6 th Head | 5" ~ 7" | 5" ~ 7" | 5" ~ 7" |
Pneumatic Air 90 PSI (CFM) | 5 | 5 | 5 |
Dust Outlet Diameter | 5" x 5 | 5" x 6 | 5" x 5 |
N.W. (LBS) | 5850 | 6400 | 7200 |
G.W. (LBS) | 6700 | 7200 | 8100 |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PART: 12565-E - DUST COLLECTOR - MOTOR 10 HP - BELFAB
PART: 12565-E - DUST
COLLECTOR - MOTOR 10 HP - BELFABUSED - VERY GOOD
CONDITIONMain Motor: 10 HP, 230/460v, 3phStart/Stop
Station for 230v, 3phChip Collect in
Two Lower Plastic Bags
Filtration Surface (sq.ft): 331.63
AMXmachinery
PARTE: 2AM-U-500 - ARMADORA DE MARCOS PROGRAMABLE - 1 CANAL
PARTE: 2AM-U-500 - ARMADORA DE MARCOS PROGRAMABLE - 1 CANALOur U-500 is recommended for high-volume production facilities that require the primary use of a single sized V-Nail for frame joining. The U-500 has the same user-friendly, touch screen interface as our U-600 Underpinner. The only difference between the two models being the U-500 has single channel capacity compared to a multi-channel with the U-600 unit.With data storage of 5,000 different frame profiles, the operator can easily recall...
AMXmachinery
SIERRA VERTICAL ELCON ESPECIAL 1
ELCON 320 DSX-E TO CUT THROUGHT 0-135 MM AUMINUMA vertical panel saw can be used to cut through various materials, like wood based,plastics, composites etc.This episode's custom built Elcon panel saw was developed to cut through aluminium tailgate / cargolift. A bar code scanner tells the machine to cut off the left and left and right side. The sawing speed is automatically adjusted to the thickness of the material, in this case up to 135mm!
AMXmachinery
PARTE: 12539 - TRITURADORA - BLOAPCO - MODELO 3CAXS3036BV - 40 HP
PARTE: 12539 - TRITURADORA - BLOAPCO - MODELO 3CAXS3036BV
- 40 HP
USADO - BUENAS CONDICIONES
(3) Rotores 36" ancho
Abertura alimentación superior 30" x 36"
Motor
Baldor Reliance 40 HP, 3/60/ 230-460 V, 1775 RPM
Descarga inferior aproximada 28" x 28