Identificador: 2045
Abierta
PARTE: 12427 – ESPIGADORA DOBLE DE CADENA - CATENALLI - DOUBLE END TENONER
AMXmachinery
Descripción
PARTE: 12427 – ESPIGADORA DOBLE DE CADENA - CATENALLI - DOUBLE END TENONER
USADA - BUENAS CONDICIONES
Útil para la fabricación de pisos de madera.
Donde 1ro de hace la parte longitudinal y en lo posterior las testas.
En la maquina longitudinal 2 motores por cada lado.
En la maquina perfiladora de cabezas 4 motores por cada lado .
Flechas de 40mm
Volts 380 50Hz.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6
PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6USADO – BUENAS CONDICIONES - RECONSTRUIDOMax trim width 7.5"Shear Cutting ActionRotor Speed 500 to 3,600 rpm1 HP motorModel 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution. The open-rotor design facilitates free passage of air and material. Shear-cut action for paper and tough, thin film and foil. Total weight is 135 pounds17"L x 13.25W x 22.5H
AMXmachinery
REASERRADORA HORIZONTAL - 30 HP - 10.5” ANCHO
PARTE: 3SW-
HBR-300 - REASERRADORA HORIZONTAL - 30 HP - 10.5” ANCHO
NUEVA CON GARANTIASpecificationsMaximum Material Size (W X H): 12"x 12
"(300x300 mm)Distance From Blade To Conveyor: 5/64"~10-5/8"(2~270mm)Minimum Cut Piece: 2mmSaw Wheel Diameter: 28" x2(700mm x2)Sawblade Length: 196"(4980~4990mm)Sawblade Width: 2" OPTION 3"(50mm
OPTION 75mm)Conveyor Belt Sizes(Wxl): 270 x 4200mmSawblade Speed: 25.4m/sFeed Motor: 1HP WITH INVERTERFeed Conveyor Tilt: 0~30 DEGREEFeed Speed (Variable): 0~1...
AMXmachinery
PARTE: 12295 - LIJADORA DE BANDA ANCHA - 52” ANCHO - 2 LIJAS - TIMESAVERS
PARTE: 12295 - LIJADORA DE BANDA ANCHA - 52”
ANCHO - 2 LIJAS - TIMESAVERS
USADA BUENAS CONDICIONES
460/60/3 electrics
Standard
Specifications:
1st head,
75 HP, 230/460/60/3 hard rubber contact drum
2nd head,
60 HP, 230/460/60/3 hard rubber contact drum
Weighs 16,000 lbs.
AMXmachinery
LIJADORA DE TAMBOR
PARTE # 2SM-913003 - LIJADORA DE 2 TAMBORES - 25” DE ANCHOSanding Capacity:Maximum Width (in): 25Minimum Length (in): 2-1/4, varies per applicationMaximum Thickness (in): 6Minimum Thickness (in): 1/32Dimensions HxWxD (in): 52 x 42 x 27Drum: 5 x 25 extruded aluminumDrum Speed: 1740 RPMDust Hood: Steel hood w/ two 4" vacuum ports, hinged at back, 1000 CFM recommendedBall bearings (1"): 4, sealed and permanently lubricatedConveyor Motor: 43 in.-lb. torque, direct drive D.C. motor, infinitely vari...