Identificador: 2077
Abierta
Descripción
PARTE: 12439 - CEPILLO 2 CARAS - ANCHO 25” - CANTEK
USADO - EN BUENAS CONDICIONES
Manufactured in 2015
• 50.5 Total HP
• Spring loaded conveyor pin system
• Spiral insert knife cutterheads with
two sided solid carbide knives
• Digital electronic thickness
adjustment
• 25” Wide x 8” thick capacity
• Inverter variable feed speeds
• Sectional chip breaker and feed roller
before top head
• Removeable bottom head for knife change
• Chain feed drive
• Auto conveyor lubrication
• New replacement cost over $36,000.00
• Currently in storage, will load on truck
• Good condition, As taken from service
Maximum working width 25″
Maximum working thickness 8″
Minimum working thickness 0.315"
Minimum workpiece length 12.2″
Bottom head motor 20 HP
Top planing head motor 25 HP
Feed motor 5 HP
Table elevation motor 1/2 HP
Cutterhead diameter 4"
Knife dimensions 30mm x 12mm x 1.5mm w/ bevels (96 pcs per head)
Cutterhead speed 5400 RPM
Feed speed (variable) 26-80
FPM Dust ports 2 @ 6”
Table dimensions 27" x 103" (32" from the floor)
Machine voltage
460/3/60 = 63 amps
230/3/60 = 125 amps
Prewired 460
Volt Machine dimensions (LxWxH) 105″ x 45.1″ x 67.7″
Net weight 6600 lbs
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 1SL-DC-TS12 - SIERRA DE MESA 12" - MOTOR 3 HP
PARTE:
1SL-DC-TS12 - SIERRA DE MESA 12" - MOTOR 3 HPMOTOR: 3 HP, 110/220V, 60 Hz, 1 FASESMEDIDAS DE LA MESA CON EXTENSION: 27" X 40-1/2"ALTURA MESA: 34-1/2"DIAMETRO DEL DISCO 12"DIAMETRO FLECHA 5/8"VELOCIDAD DEL DISCO: 4560 RPMRANGO ELEVACION DISCO: 0 A 4"RANGO INCLINACION DISCO: 0 A 45 GRADOSCAPACIDAD MAXIMA DE CORTE A 90 GRADOS: 4"CAPACIDAD MAXIMA DE CORTE A 45 GRADOS: 2-3/4"PESO: 127 KGS
AMXmachinery
SYSTEMA PARA CLAVADO BASTIDORES - PIES 4X8
PARTE # 2RT-R375V - SYSTEMA PARA CLAVADO DE BASTIDORES - PIES 4X84′ X 8′ Vertical Assembly EaselSecond Squaring Bar(6) Universal Clamping Cylinder & ManifoldFoot Treadle45 Degree Vertical EaselSquaring Bars on Right and Left Sides2″ Cylinder Position Grid Pattern3″ Bore Clamp Cylinder HousingPerforated Steel TableManifold with 1/4″ NPT Regulator/GageDesigned and Manufactured in the USAAdditional options for this machine include:U300E04 – Additional Clamp CylinderU300E16 – Foot Trea...
AMXmachinery
CABEZALES PARA TALADROS - DISTANCIA AJUSTABLE
PARTE: 2TA-A-2CWSERIES - CABEZAL PARA TALADROS - DISTANCIA AJUSTABLEMicro Adjustable.Maximum flexibility of drills distance application.Accurate center distance positioning.Heavy-duty construction requires minimum maintenance.Fast setup that helps reduce boring downtime. SpecificationsDimensionsABCDEFA-2CW130.39" (10 mm)0.39" (10 mm)1." (28 mm)2" (55 mm)4" (106.5 mm)2" (57 mm)A-2CW185" (127.5 mm)3" (67 mm)A-2CW195" (127.5 mm)3" (67 mm)A-2CW226" (143 mm)3" (82 mm)A-2CW258" (191 mm)4" (109 mm)...
AMXmachinery
LIJADORA DE TAMBOR 50"
PARTE # 2SM-750102 - LIJADORA DE 2 TAMBORES - 50" DE ANCHO – 7.5 HP, 220V, 1 FASEPARTE # 2SM-750302 - LIJADORA DE 2 TAMBORES - 50" DE ANCHO – 7.5 HP, 220V, 3 FASES SPECIFICATIONSSanding Capacity:Maximum Width (in): 25, 37, 50Minimum Length (in): 3-1/2Maximum Thickness (in): 25″ model: 637″ & 50″ models: 12Minimum Thickness (in): 1/32Dimensions HxWxD (in):25″ model: 43 x 46 x 3137″ model: 43 x 58 x 3150″ model: 50 x 71 x 31Drum (in): (extruded aluminum)25″ model: 5 x 2537″ ...