ID: 2078
Open
Description
PARTE: 12440 - LIJADORA BANDA ANCHA – 1 LIJA - 37” ANCHO - CEMCO
USADA - BUENAS CONDICIONES
Manufactured in 1999
• Combination sanding head with 5 ½”
contact drum and 3 ½” platen
• 20 HP TEFC Dual Voltage Motor, 460
Volt, 3 Phase, 28 Amps
• Start, Stop and E-Stop buttons with
magnetic starter and locking disconnect
• Motor brake Via E-Stop
• 1 HP feed motor
• 37” x 75” Sanding belts
• Manual variable feed speed, 15 – 60 fpm
• Manual thickness adjustment with readout
• 4 Jackscrews
• Maximum thickness of 6.5”
• 2 Spare Platens
• Spare contact roller
• Extra sanding belts:
o 180 Grit, Wurth Paper Backed, 10 pcs
o 220 Grit, 3M Cloth Backed, 5 pcs
o 50 Grit, 3M Cloth Backed, 10 pcs
• Complete operations manual
• Pneumatic valve bank replaced
Good condition, As taken from service, Cleaned and checked
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
TALADRO MULTIPLE VERTICAL – RITTER R-46
PARTE: 12051 – TALADRO MULTIPLE VERTICAL – RITTER R-46Usada en Buenas Condiciones
AMXmachinery
MOLDURADORA – 5 CABEZALES – 9” ANCHO – WEINIG
PARTE: 12252 – MOLDURADORA – 5 CABEZALES – 9”
ANCHO – WEINIG
USADA – BUENAS CONDICIONES
– LIMPIADA Y REVISADA
5-head machine
4-3/4" X 9-1/6" capacity
Spindle configuration: 7.5 HP bottom, 10 HP
shared between right and left spindle, 15 HP top, and 10 HP bottom
Spindle diameter: 1-1/2"
Variable speed feed 20 to 40 FPM
72" infeed straightening table
First feed wheel (before bottom spindle)
pneumatic up/down
Central adjustment of top spindle chipbreaker ...
AMXmachinery
ARMADORA DE MARCOS ALFA MACCHINE
PARTE # AMX-10014 - ARMADORA DE MARCOS - ALFA MACCHINE - MTRE-MITE - VN4EN BUENAS CONDICIONES DE OPERACIONTAMANO DE MESA: 12” ANCHO X 22” FONDOALTURA DE LA MESA PARA TRABAJAR: 37”PARA MARCOS DE ESPESOR: 0.197" MINIMO A 3.15" MAXIMOPARA MARCOS DE ANCHO: 0.39" MINIMO A 3.94" MAXIMONECESITA AIRE COMPRIMIDOENERGIA: 110V, 1 FASE, 60 HZTABLERO: ALFA MACHINNE – MINIGRAF 4 ELECTRONICA – PROGRAMABLE CON LECTOR DIGITALMEDIDAS TOTALES DE LA MAQUINA: 31” ANCHO X 24” FONDO X 61” ALTOVideos de...
AMXmachinery
GUILLOTINA CHAPA 1 NAVAJA
PARTE # 3NN-CUTMATE3200 – GUILLOTINA PARA CHAPA – 1 NAVAJA - 3200 MMPARTE # 3NN-CUTMATE2800 – GUILLOTINA PARA CHAPA – 1 NAVAJA - 2800 MMSpecificationsModelCutMate 3200CutMate 2800Cutting Length3200 mm2800 mmDaylight Opening120 mm120 mmElectric Powerapprox. 7.5 kwapprox. 7.5 kwCutting Width25 ~ 650 mm25 ~ 650 mmPack Beam Width150 mm150 mmDimensions (L x W x H)5000 x 1750 x 1850 mm4600 x 1750 x 1850 mmNet Weightapprox. 4800 kgapprox. 4450 kgColorRAL 8019 / RAL 9003RAL 8019 / RAL 9003 Than...