Identificador: 2223
Abierta
Descripción
PARTE: 12507 - CENTRO DE MAQUINADO VERTICAL – CNC – HASS GR-512
USADO – BUENAS CONDICIONES
2006 HAAS GR-512
6" Z-AXIS COLUMN RISER, 10,000 RPM SPINDLE
RENISHAW PROBING SYSTEM
ONLY 2,200 SPINDLE HOURS
IN PLANT, UNDER POWER, AVAILABLE IMMEDIATELY
Specifications:
TABLE LENGTH 146"
TABLE WIDTH 53"
TABLE CAPACITY 6,000 lb
X-AXIS TRAVEL 144"
Y-AXIS TRAVEL 61"
Z-AXIS TRAVEL 11"
SPINDLE SPEED 10,000 RPM
SPINDLE MOTOR 15 hp
SPINDLE TAPER CAT 40
TOOL CAPACITY (ATC) 10
Equipped With:
Z-AXIS COLUMN RISER (6")
RENISHAW PROBING SYSTEM
10,000 RPM SPINDLE
COORDINATE ROTATION & SCALING
SPINDLE ORIENTATION
RIGID TAPPING
MACROS
COOLANT SYSTEM
** AS OF OCTOBER 2023, SPINDLE TIME - 2,279 HOURS
** MACHINE CUT PRIMARILY ALUMINUM & SOME PLASTIC
** IN PLANT, UNDER POWER, AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12446 - MOLDURADORA - 5 CABEZALES - PROFIMAT 235
PARTE: 12446 - MOLDURADORA -
5 CABEZALES - PROFIMAT 235
USADA - BUENAS CONDICIONES5 heads bottom, right, left, top, bottom9-1/16" x 4-11/16" capacity20-78 FPM variable feedMechanical readouts on all spindlespowered out feed rollerstraightening vane
Mfg: 1996440 volt, 3 phase, 60 cycle
AMXmachinery
MAQUINA FORJADORA MANUAL
PARTE # 1EF-001 - MAQUINA FORJADORA MANUAL CON MUELAS DE ACERO SPROCKET GOLDEN Maquina forjadora para la elaboración de escoba de fibra de mijo y otras fibrassintéticas y naturales y elaboración de trapeador. Capacidad de produccion: 30 a 35 docenas por turno.
AMXmachinery
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"Nueva con garantíaPara palos de escoba, trapeadores y recogedoresAlta produccionCapable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use ...
AMXmachinery
ENCHAPADORA
PARTE # 11860 - ENCHAPADORA - CEHISA EP9220V, 3 Ph, 60 Hz, 23.5 AMPALIMENTA AUTOMATICAMENTE LA CINTACORTA AL PRINCIPIO Y AL FINALPERFILA AMBOS LADOS A LO LARGOPULE AMBOS LADOS