Identificador: 1480
Abierta
ID de articulo : # 1480 se ha agregado a su lista de deseos.
Descripción
PARTE: 2EB-STA-1025-6 – CALIPER DE BOLSILLO – STARRETT 1025
NUEVO CON GARANTIA
Range 0 in to 4 3/4 in, Graduations 1/32 in, 1/64 in, Accuracy /-0.003 in, Material Stainless Steel, Dimension Type Fractional Inch, Graduations - Lower Scale 1/32 in, Graduations - Upper Scale 1/64 in, Jaw Actuation Type Slide, Jaw Depth 1 3/8 in, Maximum Measurement - Decimal Inch 4.75 in, Maximum Measurement - Fractional Inch 4 3/4 in, Measurements Inside, Outside, Measures Depth No, Measures Inside Dimension Yes, Measures Outside Dimension Yes, Measures Step No.
These hardened, stainless steel provide 4-way measurements for outside, inside, depth, and step. Fitted case included.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CEPILLO 2 CARAS – NORTHTECH NT400XL
PARTE:
12273 – CEPILLO 2 CARAS – NORTHTECH NT400XL
USADO – MUY BUENAS CONDICIONES – SOLO POCAS HORAS DE USOCabezales Helicoidales218 hours on the machine43 HP total230 volt
Belt drive
AMXmachinery
LIJADORA DE BANDA ANCHA – COSTA
PARTE: 12201 - LIJADORA DE BANDA
ANCHA – ANCHO 1150 MM - COSTA
USADA – BUENAS CONDICIONESModel: 71 C1150Manufacture
year 1994
V380
Hz50
1
Steel Roller
Total
32 Kw (40 HP)
AMXmachinery
PLANTA DE LUZ 1,200 WATTS
PARTE # M-PW-1200 - PLANTA DE LUZ 1,200 WATTSMODELOPW-1200FASESMONOFASICAARRANQUEMANUALCAPACIDAD MAXIMA1200 WATTSCAPACIDAD NORMAL1000 WATTSVOLTAJE120 VOLTSAMPERAJE10 AMPMOTOR2.5 HP/3600 RPMNIVEL DE RUIDO60 DB @ 7 MTSTANQUE3.75 LTSFUNCIONAMIENTO AL 50% DE CARGA6 HRSPESO20 KGS
AMXmachinery
PARTE: 2AM-U-300 - ARMADORA DE MARCOS - SEMIAUTOMATICA
PARTE:
2AM-U-300 - ARMADORA DE MARCOS - SEMIAUTOMATICANUEVA CON GARANTIAThe U-300 is a bench-top, frame joining machine and the most popular model of custom frame shops. It is compact, well constructed, and built for many years of trouble free operation. The design of the U-300 allows the operator to set the front and back measuring stops for V-Nail insertion. The frame is then moved across the nail head and V-Nails are driven or stacked anywhere along the frame joint. The V-Nail insertion is a...