Identificador: 2445
Abierta
PARTE: 12567 - REASERRADORA HORIZONTAL - 1 BANDA - 6” ANCHO X 6” ALTO - BAKER
AMXmachinery
Descripción
PARTE: 12567 - REASERRADORA HORIZONTAL - 1 BANDA - 6” ANCHO X 6” ALTO - BAKER
Usada - Buenas condiciones
3 Phase | 570V | 30HP |
Capacity is roughly 6" wide x 6" tall
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
TALADRO MULTIPLE VERTICAL NEUMATICO
PARTE: 2MK-LBP13 – TALADRO MULTIPLE VERTICAL – 13 TALADROS - NEUMATICOProvide features that offer a longer life, such as the Lubricated Aluminum Head (versus a sheet metal head) and Heat treated Steel Gears (versus plastic gears). With a 1 HP motor (versus standard 3/4 HP in most models) and Stainless Steel Spindles (versus steel spindles), these boring machines offer carpenters and woodworkers the opportunity to work with the most innovative bench top boring machine currently on the market!...
AMXmachinery
SIERRA CINTA 37"
PARTE # M-2CA-HB950A – SIERRA CINTA / REASERRADORA - VOLANTES 37” - MOTOR 10 HP – MESA INCLINABLENueva con garantíaDiámetro volantes 37”Ancho del volante: 2″Tamaño mesa: 45-1/4” x 31-1/2″Mesa inclinable: 0°~45°Capacidad de altura: 22″Velocidad de la sierra: 5500 FPMLongitud de la sierra: 259” – 261″Ancho de la sierra: 1/4″~2″Motor: 10HP, 220V, 3 fasesPeso: 2046 lb.Tamaño de la maquina: (L*W*H) 63.75″ x 32.7″ x 113.4″
AMXmachinery
PARTE: 12322 - PUNZONADORA - 30 TONS
PARTE: 12322 - PUNZONADORA - 30
TONS
USADA - BUENAS CONDICIONES
Tonnage
capacity:
30 tons
Maximum material thickness:
1/4" mild steel
Punching
capacity:
1" dia. - 1/4" mild steel
3-1/2" dia. - 12 ga. mild steel
Sheet
size:
18" x 30"
Throat
depth: ...
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...