Identificador: 2475
Abierta
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 2CK-M412 - CEPILLO 4 CARAS – 5 MOTORES - 13” ANCHO
Economical and compact machine designed for professional woodworkers looking to produce a wide range of mouldings or S4S. With individual motors to each spindle you can comfortably produce a wide range of products including flooring, crown moulding, paneling, door & furniture components, S4S, and more. The electronic digital thickness control and mechanical readouts allow for fast and accurate adjustment of the spindles to produce the desired result. Equipped as standard with both infeed and outfeed tables the material is well supported during cutting operations. Its small footprint makes it the ideal solution for the small custom shop who wants to produce their own mouldings.
- Four cutting modes: Single / double / three / four-sided planing and moulding
- Designated individual motors to each spindle
- Variable feed speed from 11-52 FPM for optimum finish results
- Digital motorized thickness controller (inch / metric) for operator convenience
- Mechanical digital readouts for side head adjustment
- 3 depth of cut control plates for bottom cutterhead
- Includes infeed outfeed table for supporting material during machining
- Upgraded adjustable infeed fence for convenient depth adjustment
- See through top guard so operator can view cutterheads
KEY ADVANTAGES
- Centralized control panel to turn on and off all working units and adjust thickness opening
- Top horizontal spindle is equipped with two pattern knife for planing and moulding operations
- Left vertical spindle can be adjusted in and out manually with a mechanical digital readout for accurate positioning
Planing | Width: 13” (330MM) |
Depth: 7/16” – 9” (12 – 230mm) | |
2-Side Planing/Moulding | Width: 13-5/8″” (346mm) |
Depth: 7/16” – 9” (12 – 230mm) | |
4-Side Planing/Moulding | Width: 0 – 12” (0 – 305mm) |
Depth: 7/16” – 4” (12 – 100mm) | |
Top Horizontal Spindle | Width: 17-15/16” (455mm) |
Max. planing depth: 5/16” (8mm) | |
Max. moulding depth: 3/4” (19mm) | |
Speed: 7000 RPM | |
Cutterhead diameter: 2-7/8” (72mm) | |
Motor: 7-1/2HP (5.5Kw) | |
Bottom Horizontal Spindle: | Width: 13-5/8” (346mm) |
Max. planing depth: 1/4” (6mm) | |
Max. moulding depth: 3/16″ (5mm) | |
Speed: 7000 RPM | |
Cutterhead diameter: 2-7/8” (72mm) | |
Motor: 5HP (3.7Kw) | |
Right & Left Vertical Spindles | Max. cutting height: 4” (100mm) |
Max. cutting depth: 13/16” (21mm) | |
Spindle diameter: 1-1/4″ (31.75mm) | |
Speed: 7000 RPM | |
Max. cutterhead diameter: 3-1/2” (90mm) | |
Motor: 4.1HP (3Kw) x 2 | |
Table | Area: 1125 x 685 mm |
Elevation: 230mm | |
Power Table (Raise): 120w | |
Dust Hood Outlet | 4 – 100mm (3.95″) |
Minimum width | 0-306mm |
Minimum thickness | 12-230mm |
Feed System | Speed (Variable): 11-52 ft/min. |
Motor: 1HP (0.745Kw) | |
Machine Dimensions (LxWxH) | 1485 x 1265 x 1216 mm |
Packing Dimensions (LxWxH) | 1350 x 1140 x 1130 mm |
New Weight | 635kgs (1400bs) |
Gross Weight | 730kgs (1610lbs) |
Electrics | 230/3/60 – 48 Full Load Amps |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ARMADORA DE CAJONES
ARMADORA DE CAJONES PARTE: 2CK-JEN60Is designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machin...
AMXmachinery1
DOBLADORA DE METAL 5' X 10GA
DOBLADORA DE METAL 5' X 10GA PARTE: 2GM-0510EThis machine has a 3HP Motor, rated at 220V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is po...
AMXmachinery1
TALADRO MULTIPLE - 46 DOBLE FILA
PARTE: 2JG-MAG-SYSTEM46 - TALADRO MULTIPLE - 46 DOBLE FILAProvides (2) 23-spindle heads on 32 mm centers; distance between first and last spindle center of each head is 27-23/32" (704 mm).Front end adjustment for quick and easy set-up.(2) 1.5 HP 2,800 RPM motors; max.Boring depth is 2-1/16" (55 mm).Side depth counter system; extractable 400 mm support rollers for long panels.Maximum distance between heads is 25-19/32" (650 mm) and minimum width is 5-1/8" (130 mm).Complete with: 46 quick cha...
AMXmachinery1
PARTE: 12461-1 - EXTRACTOR CENTRIFUGO - DE AIRE - DE COCINA INDUSTRIAL – ALUMINIO
2 EXTRACTORES IGUALES EN EXISTENCIA
PARTE: 12461-1 - EXTRACTOR CENTRIFUGO - DE AIRE - DE
COCINA INDUSTRIAL – ALUMINIO
PARTE: 12461-2 - EXTRACTOR CENTRIFUGO - DE AIRE - DE
COCINA INDUSTRIAL – ALUMINIO
USADO – MUY BUENAS CONDICIONES
MARCA: DAYTON ELECTRIC
MODELO: 4HX98B
Base 34” X 34”
Diámetro total: 42”
Altura total: 36”
Baleros nuevos Motor y Extractor
Motor 1.5 HP, 115/230V, 1 Fase, RPM
1,725, AMP 18/9, marca BALDOR, actualmente conectado a 115VVi...