Identificador: 286
Abierta
.jpg)
Descripción
PARTE: 2TA-BS-1212HR-TN - REASERRADORA HORIZONTAL - 2 SIERRAS
PARTE: 2TA-BS-1616HR-TN - REASERRADORA HORIZONTAL - 2 SIERRAS
NUEVA CON GARANTIA
| Specifications | BS-1212HR-TN | BS-1616HR-TN |
|---|---|---|
| Max. Cutting Capacity | 12" x 12" | 16" x 16" |
| Distance between Blade to Conveyor | 1/4" ~ 12" | |
| Saw Wheel Diameter | 28" x 2 | |
| Saw Blade Length (Width) | 201" (2") | 201" (2" ~ 3") |
| Saw Blade Speed | 6000 FPM | |
| Feed Conveyor Width | 12" | 16" |
| Feed Speed (Variable) | 0 ~ 90 FPM | |
| Main Motor (Each Head) | 20 HP x 2 | 30 HP x 2 |
| Saw Blade Lift Motor | 1/2 HP | |
| Feed Conveyor Motor | 3 HP | |
| Dust Hood | 4" x 6 | |
| N. W. | 7200 LBS | 8600 LBS |
- Machine was built with ruggedly constructed throughout for maximum stability, high precision cutting and minimum trouble.
- It is equipped with a digital controller for convenient and accurate thickness setting.
- The feed conveyor has a tilting design allowing for maximum 30 degree bevel cuts.
- When the feed conveyor is tilted for bevel cutting a side support is applied for safe and stable cutting operations.
- Variable feed speed is controlled by a frequency inverter for best cutting requested.
- The infeed and outfeed pressure rollers are easily raised or lowered by a gear rack.
- The infeed and outfeed pressure rollers are spring loaded and easily adjusted for the horizontal or vertical direction to suit various workpiece thicknesses.
- Blade tension is adjusted by means of a hand wheel.
- A tension scale allows the operator to correctly adjusted the tension for different blade thickness.
- The cast iron saw blade wheel are dynamically balance for smooth running.
- Blade guard is easily lifted up, supported by two nitrogen gas cylinders for convenient blade change.
- The roller type return conveyor equipped at left side of the machine provides easily repetitive cutting.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12577 – CHAFLANADORA - HAZELDINE
PARTE: 12577 – CHAFLANADORA - HAZELDINEUSADA – BUENAS CONDICIONES
AMXmachinery
BANDA PARA CEPILLO 12.5"
PARTE # SIL-R-CM12.5B-A26 - BANDA PARA CEPILLO 12.5" BANDA PARA CEPILLO 12.5 PULGADAS SILVERLINE
AMXmachinery
PARTE: AMX-10158 - EXTRACTOR - ALUMINIO - MOTOR 3 HP - NORTH AMERICAN MFG
PARTE: AMX-10158 - EXTRACTOR - ALUMINIO - MOTOR 3 HP -
NORTH AMERICAN MFG
USADO - BUENAS CONDICIONES
MARCA:
NORTH AMERICAN MFG. CO.
MODELO:
1-401
HECHO EN USA, CLEVELAND, OHIO
3 HP, 220/440V, 3 FASES, CONECTADO
A 220V, MARCA LINCOLN
BALEROS NUEVOS
MEDIDAS: 27” FRENTE X 20” FONDO X
29” ALTO
ENTRADA REDONDA: 5”
SALIDA CUADRADA: 4” X 4”
VOLUME CFM: 285
AMXmachinery
POSTFORMADORA
PARTE # 2EV-0190 - POSTFORMADORA - 12 PIES LARGO 1 LADO - EVANS 0190Para hacer dobles para Back Splash- 110V, 1 phase, 15 amps- 220V, 1 phase, 8 amps- Air: 80 PSI - 12' maximum capacity (3660 mm)- Back Splash Height: Minimum 1" (25 mm), Maximum 34" (860 mm) - Possible coving radios: 1/8" (3 mm) , 3/16" (5 mm), 3/8" (10 mm)- Crated weight 1800 LBS. - Shipping dimensions 182” long X 34” wide X 50” high- Bends inside cove bends for back splashes. The 0190 is available with either...