Identificador: 286
Abierta
ID de articulo : # 286 se ha agregado a su lista de deseos.
.jpg)
Descripción
PARTE: 2TA-BS-1212HR-TN - REASERRADORA HORIZONTAL - 2 SIERRAS
PARTE: 2TA-BS-1616HR-TN - REASERRADORA HORIZONTAL - 2 SIERRAS
NUEVA CON GARANTIA
| Specifications | BS-1212HR-TN | BS-1616HR-TN |
|---|---|---|
| Max. Cutting Capacity | 12" x 12" | 16" x 16" |
| Distance between Blade to Conveyor | 1/4" ~ 12" | |
| Saw Wheel Diameter | 28" x 2 | |
| Saw Blade Length (Width) | 201" (2") | 201" (2" ~ 3") |
| Saw Blade Speed | 6000 FPM | |
| Feed Conveyor Width | 12" | 16" |
| Feed Speed (Variable) | 0 ~ 90 FPM | |
| Main Motor (Each Head) | 20 HP x 2 | 30 HP x 2 |
| Saw Blade Lift Motor | 1/2 HP | |
| Feed Conveyor Motor | 3 HP | |
| Dust Hood | 4" x 6 | |
| N. W. | 7200 LBS | 8600 LBS |
- Machine was built with ruggedly constructed throughout for maximum stability, high precision cutting and minimum trouble.
- It is equipped with a digital controller for convenient and accurate thickness setting.
- The feed conveyor has a tilting design allowing for maximum 30 degree bevel cuts.
- When the feed conveyor is tilted for bevel cutting a side support is applied for safe and stable cutting operations.
- Variable feed speed is controlled by a frequency inverter for best cutting requested.
- The infeed and outfeed pressure rollers are easily raised or lowered by a gear rack.
- The infeed and outfeed pressure rollers are spring loaded and easily adjusted for the horizontal or vertical direction to suit various workpiece thicknesses.
- Blade tension is adjusted by means of a hand wheel.
- A tension scale allows the operator to correctly adjusted the tension for different blade thickness.
- The cast iron saw blade wheel are dynamically balance for smooth running.
- Blade guard is easily lifted up, supported by two nitrogen gas cylinders for convenient blade change.
- The roller type return conveyor equipped at left side of the machine provides easily repetitive cutting.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12420 – SIERRA OPTIMIZADORA – DIMTER WEINIG OPTICUT 260
PARTE: 12420 – SIERRA OPTIMIZADORA
– DIMTER WEINIG OPTICUT 260
USADA – MUY BUENAS CONDICIONESYear
of Manufacture: 2018Condition:
ExcellentElectric: 460 Voltage 60 Cycle 3 PhaseGREAT
CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE.Working
dimensions:Cross
section min./max
0.48"- 10.23" width; .25" - 3.15" thickness. Min.
part length 5.5" cut. Length
min/max 15.75"- 16'0".Motor:
10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.Saw:...
AMXmachinery
PARTE: 12110-1 - CABEZALES PARA MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 60, 100 Y 150 MM LARGO
PARTE: 12110-1 - CABEZALES PARA
MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 60, 100 Y 150 MM LARGOUSADOS – MUY BUENAS CONDICIONES20° ANGULO DE CORTEVARIOS EN EXISTENCIA
AMXmachinery
EXTRACTOR DE TURBINA - MOTOR 5 HP
PARTE:
12292 - EXTRACTOR DE TURBINA - MOTOR 5 HP
USADO - MUY BUENAS CONDICIONES - REVISADO Y CHECADO
MOTOR 5 HP, 220V, 3 FASES
3500 RPM
ASPAS METALICAS
ENTRADA REDONDA: 8”
DIAMETRO
SALIDA CUADRADA: 5.5”
X 7”
MEDIDAS TOTALES: 59
CM ANCHO X 52 CM FONDO X 62 CMQ ALTO
AMXmachinery
PARTE: 12506 – CENTRO DE MAQUINADO VERTICAL – CNC – HASS VF-6/50
PARTE: 12506 – CENTRO DE MAQUINADO VERTICAL –
CNC – HASS VF-6/50
USADO – BUENAS CONDICIONES
2015
HAAS VF-6/50 &
HRT310
Type: Vertical
Machining Centers
Category: Machining
Manufacturer: HAAS
Model: VF-6/50
Year: 2015
Description
HRT310 Rotary Table,
4th Axis Driving & Wiring, 8" Column Riser, Renishaw Probing,
Through-Spindle Coolant, CAT50 Taper, only 1,500 Spindle Hours. This 2015 Haas
VF-6/50 & HRT310 are in plant, under power and available i...