Identificador: 282
Abierta
Descripción
PARTE: 2TA-CM-200LG - PERSIANERA PARA HACER SHUTTERS
Features:
- A faster round louver groove mortise machine provides variable oscillating speed.
- Distance between the slot is controlled by the template.
- Two working tables built in both side of the machine to double the production for high efficiency mortising operation.
- Automatic pneumatic hold down clamps
- Fully automatic mortise produce cycles.
- Pneumatic pistons for drilling depth speed control, enable for best results.
- Depth of mortising is easily adjustable.
- Powerful industrial motor for maximum cutting capacity.
- Precision sealed long life bearing.
- Heavy cast iron frames and table for durability usage.
| Specifications | CM-200LG |
|---|---|
| Slot per Minute on 2 Working Pieces | 20 holes |
| Adjustable Slot | 0°~90° |
| Max. Depth of the Slot | 1" (30 mm) |
| Max. Size of the Working Piece | 4" x 5" (100 x 130 mm) |
| Min. Size of the Working Piece | 0.39" x 1" (10 x 30 mm) |
| Bits Rotation | 12000 RPM |
| Bits motor Power | 5 HP |
| Sliding Motor | 1 HP |
| Machine Size | 158" x 45" x 47" (4000 x 1140 x 1200 mm) |
| Packing Size (Packing Mold) | 118" x 4" x 2" (3000 x 100 x 40 mm) |
Packing Size(Packing Machine) | 83" x 45" x 55" (2100 x 1145 x 1400 mm) |
| N.W. | 1962 LBS (890 kg) |
| G.W. | 2315 LBS (1050 kg) |
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2SP-S-2415 - TRITURADORA - ASTILLADORA - MOTOR 15 HP - ENTRADA 24” LARGO X 36” ANCHO
PARTE: 2SP-S-2415 - TRITURADORA - ASTILLADORA - MOTOR 15 HP - ENTRADA 24” LARGO X 36” ANCHO PARA MADERA, MDF, PLYWOOD, COMPOSITES, PAPEL, CARTON, ETC.NUEVO CON GARANTIA24" wide cutterhead block, 24" wide x 36" deep inlet hopper.15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.Generates solid material into approximately 3/8" x 1" sizes.A robust fabrication design built for many years of daily, commercial use s...
AMXmachinery
SIERRA CIRCULAR - PARA SIERRAS MULTIPLES
SIERRAS CIRCULARS PARA SIERRAS
MULTIPLES
PARTE
DIAM
EXT
DIAM
INT
DIENTES
CORTE
ESPESOR
2CM-280.021.08S
200MM (8”)
2.5MM (1”)
21 3
ATB
2.5 / 1.8
MM
ABERTURA
2.5 MM, se pueden abrir a 46 MM, etc.
AMXmachinery
PARTE: 2GM-PBR - ROLADORA ELECTRICA - 4-10 PIES
PARTE:
2GM-PBR - ROLADORA ELECTRICA - 4-10 PIES
RODILLO
DOBLADOR ENDURECIDO DE 4 – 10 PIES PARTE: 2GM-PBR-0412 - 4’x12Ga - Mov. Manual del Roll, 2HP, 220V, 3PH.PARTE: 2GM-PBR-0412E - 4’x12Ga - Mov. Eléctrico del Roll, 2HP, 220/440V, 3PH.PARTE: 2GM-PBR-04316E - 4’x3/16” - Mov. Eléctrico del Roll, 3HP, 220/440V, 3PH.PARTE: 2GM-PBR-0425E - 4’x1/4” - Mov. Eléctrico del Roll, 5HP, 220/440V, 3PH.PARTE: 2GM-PBR-0510E - 5’X10Ga - Mov. Eléctrico del Roll, 3HP, 220/440V, 3PH.PART...
AMXmachinery
LIJADORA DE BASTONES DOBLE
PARTE # SIL-DC-SD220 - LIJADORA DE BASTONES - 2 LIJASNueva con garantiaCapacidad de ½” a 2” de diámetroNueva con garantía 6 meses en partes mecánicasMotor de 5 HP, 220V, trifásicoVelocidad de las Bandas 5,000 pies/minVelocidad de avance: 15 - 18 mt/minTamaño de la lija 5” x 73”Tamano de la maquina: 29-1/2" x 33-1/2" x 53"Peso neto: 870 lbs, Peso bruto: 1120 lbsVideo Maquina Trabajando: VIDEO 1