Identificador: 271
Abierta
Descripción
PARTE: 2TA-PT-13HF-GN – GENERADOR - ALTA FRECUENCIA 13 KW
New with warranty
For mass productions, 2 to 3 minute per cycle for drying or bending the wood project
Varieties of wood bending shapes are able to produce.
Press one large part, slicing into many small pieces for high productivity.
Meet all kinds of furniture fabrications.
One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.
Using wooden mold instead of expensive steel mold to save development cost dramatically
Use electricity power instead of steam boiler, no influence to the environment without emissions of PM2.5.
High frequency wave penetrate into inside of glue, shorten glue cured period and forming time.
One work is able to operate 4 to 6 bending press machines.
Model: PT-13HF-GN
In Put Power: 20 KVA
Out Put Power: 13 KW
Machine Size (L x W X H): 47" x 28" x 39"
Machine Weight: 820 LBS
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
GARRUCHA 1.5 TON
PARTE # SIL-DC-GC1.5 - GARRUCHA DE CADENA - 1.5 TONCAPACIDAD 1.5 TONELADACADENA DE 3 METROS
AMXmachinery
REFACCIONES PLANTAS ELECRICAS POWEREN
REFACCIONES PLANTAS ELECRICAS POWEREN- AVR- ROTOR- ESTATOR- PORTA CARBONES- BATERIAS- MARCHAS- TANQUES- SOPORTES- PISTONES- ANILLOS- BIELAS- VALVULAS- RETRACTIL- KIT DE AFINACION- FILTRO DE AIRE- CARBURADOR
-500x500.jpg)
AMXmachinery
CABEZAL PARA MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 150 LARGO MM
PARTE: 12110 - CABEZAL PARA MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 150 LARGO MMUSADOS – COMPLETOS - EN BUENAS CONDICIONES20° ANGULO DE CORTEMARCA: - Los precios son en pesos e incluyen IVA.- Enviamos su factura.- Flete incluido a las principales ciudades de México.- Pregunte por Existencia, Cobertura de Flete a su Ciudad y Tiempos de Entrega antes comprar.
9,100.00 MXN
AMXmachinery
CEPILLO 2 CARAS - ANCHO 24” - CANTEK
PARTE:
12408 - CEPILLO 2 CARAS - ANCHO 24” - CANTEK
USADO - EN BUENAS
CONDICIONES
Top cutterhead motor 30 HP 460 volts Helical cutterhead
Bottom cutterhead motor 25 HP 460 volts straight knife
cutterhead
Feed motor 5 HP on spike carpet feed system 25 to 95 fpm
Digital control panel
Capacity 3/8” to 6-1/2” thickness
Max lumber width 24”
Min lumber length 15”