Identificador: 271
Abierta
Descripción
PARTE: 2TA-PT-13HF-GN – GENERADOR - ALTA FRECUENCIA 13 KW
New with warranty
For mass productions, 2 to 3 minute per cycle for drying or bending the wood project
Varieties of wood bending shapes are able to produce.
Press one large part, slicing into many small pieces for high productivity.
Meet all kinds of furniture fabrications.
One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.
Using wooden mold instead of expensive steel mold to save development cost dramatically
Use electricity power instead of steam boiler, no influence to the environment without emissions of PM2.5.
High frequency wave penetrate into inside of glue, shorten glue cured period and forming time.
One work is able to operate 4 to 6 bending press machines.
Model: PT-13HF-GN
In Put Power: 20 KVA
Out Put Power: 13 KW
Machine Size (L x W X H): 47" x 28" x 39"
Machine Weight: 820 LBS
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PART: 2CK-HR66-E - DUAL BAND TWIN BAND HORIZONTAL BAND RESAW
PART: 2CK-HR66-E - DUAL BAND TWIN BAND HORIZONTAL
BAND RESAW2 MOTORS 20 HP - 11.8” WIDE X 9.8” HEIGHT
NEW WITH WARRANTYWith 2′ digital readout
control panelHydraulic blade tensionSaw wheel elevation is driven
by motorConveyor is driven by
hydraulic motor
Max. board/cant size
11.8″
(W) x 9.8″ (T)
(300 x 250mm)
Distance
from upper blade to conveyor table
.79″
– 6.7″
(20 – 170mm)
Distance
...
AMXmachinery
KIT BROCAS ROUTER 5 PZAS
PARTE: 1SIL-DC-BR-5 - KIT DE 5 BROCAS PARA ROUTERVASTAGO 1/4" (8MM)ESTUCHE DE MADERA CON 5 PIEZAS
AMXmachinery
PARTE: 12521 - SIERRA DE MESA – DISCO 10” – DELTA UNISAW
PARTE: 12521 - SIERRA DE MESA – DISCO 10” – DELTA UNISAW
USADA - BUENAS CONDICIONES
-500x500.jpg)
AMXmachinery
BASTONERA 1/2" - 2"
PARTE # 2TA-RM70 - BASTONERA PARA FABRICAR PALO REDONDO ESCOBA Y PERNOS Capacidad: Redondos de ½” a 2” de diámetro (10MM a 65 MM)Motor principal: 5 HP, 220V, 60 Hz, 3 fasesMotor alimentador: 1 HP, 220V, 60 Hz, 3 fasesVelocidad de corte: 2,900 RPMVelocidad de alimentación: de 6 a 21 metros por minuto (240” a 520” por minuto)Peso neto: 350 KGSPeso Bruto: 510 KGSTipo de empaque: 1 cajaMedidas de la Caja: 40” x 40” x 40”La maquina incluye cabezal para 7/8” con cuchillas de acer...