Identificador: 2055
Abierta
.JPG)
.JPG)
.JPG)
.JPG)
Descripción
PARTE: 3AM-T-7040 - SIERRA CINTA PARA METAL - ALTA VELOCIDAD
Saw Band Tensioning Method: Manual
Core Components: Gearbox, Gear, Bearing, Engine, Motor
Core Selling Point: High-Accuracy
Blade Speed(m/min): 27.45.80
Vice Clamping: Hydraulic with Manual
Cutting Feed: Hydraulic stepless
Hydraulic Motor(kw): 0.09
Blade Tension: Hydraulic
Coolant Motor (kw): 1.5
Main Motor(kw): 5.5
Max. Cutting Capacity(mm): Round:400mm, sqaure:400*710MM
Blade Size(mm): 1.1*41*5720
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA MULTIPLE - 1 SIERRA - 15 PULGADAS
PARTE: 2CK-C14RSIs a single-blade ripsaw is geared towards the shop looking to increase efficiency in their ripping operations but cannot justify a multi-blade ripsaw. With its precision cast iron chain and track assembly, and extended pressure section, the C14RS can produce a glue joint finish ready for panel glue-up right out of the saw.Produces a guaranteed glue joint finish to 15′, which eliminates the need to joint the material after rippingPrecision straight line feeding for parallel a...
AMXmachinery1
ROUTER DE PEDESTAL - 7.5 HP
PARTE: 2CK-SR750Is the ideal solution for high volume routing and profiling of repetitive shapes. With its powerful 7.5 HP router which turns at an RPM of 10000 or 20000 RPM you can cut through solid wood or panel products with ease. Simply follow your profile with one of the guide pins included (1/4”, 3/8”, ½”) for fast and convenient routing operation. The machine is constructed with a solid welded steel frame and cast-iron tilting table. The large solid table is fitted with a s...
AMXmachinery1
SIERRA ESCUADRADORA - 5 PIES
PARTE: 2CK-P30Is the ideal solution for customers looking for the precision and convenience of a sliding table saw but have limited floor space and smaller cutting requirements. The machine has a precision sliding table which runs on ball bearings and hardened steel guide strips. It is equipped with individual motors for the main saw blade (5 HP) and scoring blade (¾ HP). The blade height and tilt is manually adjusted by means of individual handwheels. The angle of the blade is displa...
AMXmachinery1
PARTE: 2TA-GS-12RO2 - ENGOMADORA 2 LADOS – CAPACIDAD ANCHO 12”
PARTE: 2TA-GS-12RO2 - ENGOMADORA 2 LADOS – CAPACIDAD ANCHO 12”
Nueva con garantíaRoller coaster type efficiently & effectively apply glues with a minimum of setup and easily maintained.Set of three rolls (one doctor roller) for top-only or four rollers (two doctor roller) for top and bottom glue application.We designed our glue spreaders with high quality grooved rubber glue rollers with hardened rubber doctor rolls for durability usage.Stainless drip pan catches the over spread glue for...