Identificador: 2325
Abierta
PARTE: 4EL-DSX - SIERRAS ESCUADRADORAS VERTICALES - ELCON - SERIE DSX
AMXmachinery
Descripción
PARTE: 4EL-DSX - SIERRAS ESCUADRADORAS VERTICALES - ELCON - SERIE DSX
SERIE DSX-155
SERIE DSX-185
SERIE DSX-215
SERIE DSXL-155
SERIE DSXL-185
SERIE DSXL-215
SERIE DSX1/2L
SERIE DSX1/2L
SERIE DSX1/2L
|
Model & Dimensions (mm) |
155 |
185 |
215 |
|
Maximum cutting length |
3300 |
3300 |
4300 |
|
Maximum cutting height - Horizontal |
1505 |
1805 |
2105 |
|
Maximum cutting height - Vertical |
1550 |
1850 |
2150 |
Description:
The DSX models are designed for industrial use and have a large ouput capacity with e.g. increased cutting depth, pneumatic plunging and a motor rating upto 7.5 HP. A wide variety of accessories is available, such as many automatic functionalities and programming of cutting patterns.
Equipped with:
-1 meter point
4,0kW motor
Control buttons on saw-head
Options:
Motor 5.5 kW-S6 (DSX)
Variable rotation speed for 4.0kW motor
Variable rotation speed for 5.5kW motor (option O004)
Automatic shifting back frame (pneumatic)
Pneumatic mid fence
Pneumatic rotation of saw head
Pneumatic lifting transportrollers
Aluminium bottom rollers incl clamp
Pneumatic panel clamp
Pneumatic panel clamp (extra)
Extension to measuring stop
Cutting length 4.300 mm (type 185)
Cutting length 5.300 mm (type 215)
Digital read out horizontal
Digital read out vertical
Programmable vertical cutting
V-grooving set 90 degrees
Lubrication for non-ferro materials
Electro-pneumatic double cut scoring incl. compressed air curtain
Extra dust extraction at the right hand side in side panel
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ENGOMADORA DE 54”
PARTE: 11753 - ENGOMADORA DE 54”
3 - ENGOMADORA DE 54”. ENGOMADORA MARCA IND. G.H.
ACCIONADA POR 2 RODILLOS DE 50” DE LARGO Y 7 ½” DE DIAMETRO, CON ELEVADOR
OPERADO CON CONTROL BARS, MOTOR IZQUIERDO CON PERILLA MANUAL Y ELECTRICA,
CONTROL DE MANO DERECHA, ENGOMADO EN MEDIDAS DE 0.8 MM A 2.5 PULGADAS DE GROSOR
CON UNA CAPACIDAD DE PROCESO DE 110 PIES POR MINUTO, MOTOR DE 5 HP Y
MOTORREDUCTOR DE 2.5 HP
AMXmachinery
PARTE: 12420 – SIERRA OPTIMIZADORA – DIMTER WEINIG OPTICUT 260
PARTE: 12420 – SIERRA OPTIMIZADORA
– DIMTER WEINIG OPTICUT 260
USADA – MUY BUENAS CONDICIONESYear
of Manufacture: 2018Condition:
ExcellentElectric: 460 Voltage 60 Cycle 3 PhaseGREAT
CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE.Working
dimensions:Cross
section min./max
0.48"- 10.23" width; .25" - 3.15" thickness. Min.
part length 5.5" cut. Length
min/max 15.75"- 16'0".Motor:
10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.Saw:...
AMXmachinery
PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6
PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6USADO – BUENAS CONDICIONES - RECONSTRUIDOMax trim width 7.5"Shear Cutting ActionRotor Speed 500 to 3,600 RPMModel 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution. The open-rotor design facilitates free passage of air and material. Shear-cut action for paper and tough, thin film and foil.Total weight is 135 pounds17"L x 13.25W x 22.5H
AMXmachinery
PARTE: 12143 – AFILADORA - SCM
PARTE: 12143 – AFILADORA - SCM
USADA – MUY BUENAS CONDICIONESNo manual
or tools. Manual available online and
regular standard tools work.