PARTE # 10447 - SIERRA CINTA - MZ PROJETEN BUENAS CONDICIONES DE OPERACIONCORTES CURVOS/FIGURAS DE PATA DE MESA Y DE SILLAMOVIEMIENTO EN LA HOJA DE CORTECARRO DE ALIMENTACION NEUMATICOMOTOR DE 7 1/2 H.PVOLANTE DE 85 CM Y 4 1/2 DE ANCHOLARGO DE BANCA DE 3.20LIMITE DE CORTE DE 1.40
PARTE: 12575 - SEPARADOR MAGNETICO
DE BANDA
SIN USAR, EXCELENTES CONDICIONES
Unused,
“New” Conditions
Motor:
3 HP, 230/460V/3/60
Marca:
Wolverine
29-1/2”
wide x 70” long Belt
Motor:
WEG 3HP
Approximate
Weight/unit (kgs): 776
Aproximate
Pack Size/unit - L*W*H (mm) : 2276 * 1216 * 572
Speed
- It is fixed speed and can be changed with a controller.
Magnet
power is strong - the original design was to pull small scrap metal from sand
on conveyor belt.
PARTE: 2HR-64268 - CLAVADORA NEUMATICA - PARA PISOS DE MADERA Y MACHIMBREAir inlet size: 1/4 in. NPTAverage air consumption: 0.9 CFM @ 90 PSICapacity: 100 cleat nails / 80 staplesFastener length (in.): 1 in. to 2 in.Gauge: 15-1/2 to 16 GAProduct Height: 23 in.Product Length: 18 in.Product Weight: 11.1 lbs.Product Width: 3-1/8 in.Shipping Weight: 15.95 lb.Size(s): 16 gauge 1-1/2 in. to 2 in. long L-cleat nails and 15-1/2 gauge 1 in. to 2 in. flooring staplesWorking pressure (psi): 70-90 PSI